Alcoa 6061 alloy has excellent joining characteristics and good acceptance of applied coatings. It combines relatively high strength, good workability, and high resistance to corrosion. The alloy is widely available. The T8 and T9 tempers offer better chipping characteristics than the T6 temper. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as machining and surface treatment. Filing Code: AL-349. Producer or source: ALCOA Wire, Rod & Bar Division.

Alcoa C238 is a cold-finished aluminum wrought product developed for applications requiring postbrazing and welding strength. The alloy has good machinability and roll-threading characteristics. It has slightly lower corrosion resistance as compared to 6xxx series alloys. Alloy C238 has excellent welding and very good brazing properties. Initial applications include fittings and connectors that are brazed and/or welded. This product is also available in cold-heading rod that has been used to cold-form connectors. This datasheet provides information on tensile properties. It also includes information on corrosion resistance as well as machining and joining. Filing Code: AL-353. Producer or source: ALCOA Wire, Rod & Bar Division.

Alcoa Excalibar 6013 alloy has high strength, good machinability, and good corrosion resistance. It is easily joined by all welding and brazing methods, has excellent compressive properties, and has good applied coating acceptance. See also Alcoa Aluminum Alloy 6013, Alloy Digest Al-282, revised July 1988. This datasheet provides information on composition, physical properties, tensile properties, and compressive strength as well as fatigue. It also includes information on corrosion resistance as well as machining and surface treatment. Filing Code: AL-348. Producer or source: ALCOA Wire, Rod & Bar Division.

Alloy 6061 is one of the most widely used alloys in the 6000 Series. This data sheet revision adds standard tempers and many of the Alcoa special tempers, as well as properties for extrusions and shapes. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, machining, joining, and surface treatment. Filing Code: AL-281. Producer or source: Alcoa Engineered Products. Originally published May 1987, revised January 2006.

Alcoa Aluminum Alloy 6013 is a high-strength Al-Mg-Si-Cu alloy. It is available in five tempers. It is crossing many market areas of applications in aerospace, defense, automotive and general structural use. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-282. Producer or source: Aluminum Company of America. Originally published September 1987, revised July 1988.

UltrAlloy is a lead-free, enhanced machining product with the inherent benefits of a 6xxx-series alloy. The alloy is produced as a cold-finished rod and bar with strength levels comparable to 6262. The alloy is registered with the Aluminum Association as X6020. This datasheet provides information on composition, microstructure, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, machining, joining, and surface treatment. Filing Code: AL-340. Producer or source: ALCOA Wire, Rod & Bar Division. Originally published September 1996, corrected December 1996.

Alloy 6082 is part of the 6xxx series of aluminum alloys. It is similar to 6061, but not quite equivalent in physical properties. It does have higher strength than 6061. The 6082 alloy is used in structural shapes and profiles. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-394. Producer or source: Alcoa Engineered Products.

Deltalloy 4032 has good machinability and drilling characteristics when using single-point or multispindle screw machines and an excellent surface finish using polycrystalline or carbide tooling. The alloy demonstrates superior wear resistance and may eliminate the need for hard coat anodizing. Deltalloy 4032 is characterized by high strength and a low coefficient of thermal expansion. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion and wear resistance as well as machining and surface treatment. Filing Code: AL-347. Producer or source: ALCOA Wire, Rod & Bar Division.

ALUMINUM 5052 is nominally an aluminum-magnesium-chromium alloy which cannot be hardened by heat treatment; however, it can be strain hardened by cold working. It combines good workability with good fatigue strength and high corrosion resistance to the atomsphere and to salt water. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-39. Producer or source: Various aluminum companies. Originally published May 1956, revised June 1971, revised June 1973.

ALUMINUM 3003 is a wrought non-heat-treatable aluminum alloy with excellent resistance to corrosion. It is used widely in deep-drawing and forming applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-31. Producer or source: Various aluminum companies. Originally published September 1955, revised December 1973.

AA 3003 is a wrought non-heat-treatable aluminum alloy with excellent resistance to corrosion. It is used widely in deep-drawing and forming applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-284. Producer or source: Aluminum producers.