AISI Type 502 is a corrosion and heat resisting 5% chromium alloy steel. It is generally used in the annealed condition only. It is recommended for oil refinery and chemical plant equipment, oil pump impellers, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-211. Producer or source: Stainless steel mills.

JESSOPTYPE 317L and 317L Plus are low-carbon austenitic stainless steels with somewhat higher alloy content than AISI type 316L. This gives them superior corrosion resistance in difficult environments as well as higher elevated temperature strength characteristics. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-502. Producer or source: Jessop Steel Company.

CIRCLE C (AISI T5) tool steel combines increased wear resistance from higher vanadium and carbon contents with higher red hardness due to 8 to 9% cobalt content. This datasheet provides information on composition and hardness as well as fracture toughness, and deformation. It also includes information on wear resistance as well as heat treating and machining. Filing Code: TS-502. Producer or source: Teledyne Vasco.

Electralloy Nitronic 32 was created to match AISI Type 304 Stainless Steel in corrosion with twice the yield strength. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as joining. Filing Code: SS-1294. Producer or source: Electralloy, a Division of G.O. Carlson Inc..

AISI Type 501 is a low-chromium type corrosion steel that is used for its heat resistance and good mechanical properties at elevated temperatures as well as for its corrosion resistance at moderately elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-119. Producer or source: Stainless steel mills.

USS 5, Type 501, and 5S, Type 502, contain approximately 5% chromium and 0.50% molybdenum. They resist corrosion and oxidation at elevated temperatures and are particularly adaptable to applications in the petroleum refinery industry. Type 502 contains slightly lower carbon and is used for applications where better weldability is required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-22. Producer or source: United States Steel Corporation.

Allegheny Ludlum alloy 255 is a high-strength duplex stainless steel. It combines high mechanical strength, ductility, and hardness with excellent resistance to corrosion and erosion. Under most conditions of service, its corrosion resistance is superior to that of the fully austenitic AISI type 304, 316, and 317L stainless steels. Its many uses include marine scrubbers, desalination equipment, sulfuric acid production, wet phosphoric acid production, mild sour gas wells, urea production, and applications in the pulp and paper industry. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, machining, and joining. Filing Code: SS-786. Producer or source: Allegheny Ludlum Corporation. Originally published May 2000, revised June 2002.

CHROMEL-D is a special 35-20 nickel-chromium alloy developed primarily for use as heating elements in industrial furnaces designed to operate in the critical temperature range between 1500 and 1800 F. with controlled atmospheres. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as joining. Filing Code: SS-98. Producer or source: Hoskins Manufacturing Company.

1064, 1065, CS65, and S65C are wrought high-carbon (carbon = 0.60–0.70%) non-alloy steels that are, in general, used in the cold worked, quenched and tempered, or austempered condition. These steels are widely used for highly stressed parts that require higher strength levels than can be achieved by the lower carbon grades. They are also used for applications where the higher carbon is needed to improve wear characteristics. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance and wear resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-240. Producer or source: Data Survey.