Skip Nav Destination
Search Results for AISI TYPE 410
1-20 of 104 Search Results for
AISI TYPE 410
Alloy Digest (1985) 34 (10): SS-73.
Published: 01 October 1985
... AISI TYPE 410 is a hardenable 12% chromium stainless steel. It offers a wide range of mechanical properties and has good resistance to corrosion and oxidation. It can be hardened readily by austenitizing and air cooling. Among its many applications are knives, mechanical blades and other cutting...
Alloy Digest (1982) 31 (2): SS-402.
Published: 01 February 1982
... UNILOY 405 is a non-hardening modification of the 12% chromium stainless steel, AISI Type 410. A small addition of aluminum (about 0.20%) restricts the formation of austenite at high temperature so that hardening does not occur upon quenching. This characteristic makes Uniloy 405 especially suited...
Alloy Digest (2000) 49 (11): SS-808.
Published: 01 November 2000
... Lescalloy 410Cb is a modification of AISI Type 410 changed by the addition of niobium (columbium). This change provides for an increase in strength for structural applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well...
Alloy Digest (2006) 55 (3): SS-955.
Published: 01 March 2006
... AK Steel 41003 stainless is a low-carbon version of AISI Type 410 for weldability and fabricability. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming and joining...
Alloy Digest (1971) 20 (10): SS-261.
Published: 01 October 1971
... Characteristics: ARMCO 410 Cb is a modification of AISI Type 410 stainless steel having a columbium addition to improve the toughness and impact properties. The columbium addition also results in finer grain size, improved high temperature strength. and greater ease of heat treatment. In the annealed condition...
Alloy Digest (1981) 30 (12): SS-398.
Published: 01 December 1981
... 1450 and 1600OF. Cold Forming: CRUCIBLE 403 can be formed to most desired shapes with very little difficulty when in the annealed condition. Welding: CRUCIBLE weld metal. 403 should be welded using AISI Type 410 fiuer CRUCIBLE 403 is susceptible to air hardening and cracking unless the material...
Alloy Digest (1981) 30 (11): SS-395.
Published: 01 November 1981
.... Machinability: In turning operations, Carpenter Stainless Type 405 machines somewhat like AISI Type 410 and Type 430 stainless steels and AISI 1045 carbon steel. Typical speeds for turning operations are 90/140 surface feet per minute. when using high-speed steel tools. Carpenter Type 405 has a machinability...
Alloy Digest (1986) 35 (12): SS-479.
Published: 01 December 1986
... to that of the base metal. In this respect. Armco 400 High Performance-IO is superior IO AISI Type 410 stainlcsh hccau>c welding does not greatly impair the corrosion rclristancc 01 ucld areas. Oxidation Resistance: The temperaturc at which Armco 409 High Pcrl ormance-IO can start to exhibit destructive scaling...
Alloy Digest (1958) 7 (10): SS-80.
Published: 01 October 1958
... for service at temperatures up to 1200 deg. F. It discolors when heated to a temperature of 400-425 deg. F. but does not scale appreciably until above 1250 deg. F. Specification Equivalents: AMS 5350 & 5613 81 5504 8r 5351 MIL-S-862 & MEA-854 SAE 51410 & 60410 AISI Type 410 ASTM A314 & A276 ASTM A268 & Al76...
Alloy Digest (1985) 34 (7): SS-461.
Published: 01 July 1985
... is not progressive once this rust film forms. Type 405 IS resistant to the same degree as AISI Type 410 stainless steel when exposed to a wide variety of acids, salts and alkalies. Resistance to Oxidation: Type 405 possesses good oxidation resistance and may be used for intermittent senice up to 1500 F...
Alloy Digest (1966) 15 (8): SS-185.
Published: 01 August 1966
... in lO-20% nitric acid solution at 1400F. Specification Equivalents: AISI Type 410 SAE 51410 MIL-S-861 ASTM Al76 ASTM A268 ASTM A276 ASTM A314 AUS 5350 A-5504 AMS 5613 General Characteri sties: Resists scaling in continuous service up co 13OoOF and in incermicrenr service up co 14500F. This alloy...
Alloy Digest (1972) 21 (12): SS-284.
Published: 01 December 1972
... is shown in Table I. Machinability: The machinability of Carpenter Stainless No. 404 is similar to AISI Type 410 at comparable hardness levels. Workability: For hot working, heat Carpenter Stainless No. 404 uniformly to 200@21OOoF and forge, cool in air. In the annealed condition the alloy can be cold...
Alloy Digest (1976) 25 (5): SS-328.
Published: 01 May 1976
... and close to that of AISI Type 410 containing an addition of lead. Slow feeds, deep cuts and powerful, rigid machines are recommended for best results; how- ever, the feeding and rotating speeds of cutting tools should be slightly higher than that for AlSI 304 and 316. The tool should continually enter...
Alloy Digest (1980) 29 (3): SA-369.
Published: 01 March 1980
... condition, the material forms a slightly gummy chip and has behavior, in turning at least, similar to that of annealed or normalized AISI Type 410 stainless steel. Normally, turrdng is accomplished with carbide tools at a feed of 0.005 h/rev and at speeds in excess of 100 feet/min. 2. In the hardened...
Alloy Digest (1966) 15 (5): SA-195.
Published: 01 May 1966
... appli- cations requiring moderate corrosion resisrance and high mechanical strength developed by heat rrearment. It offers satisfactory resistance to temperatures up to 12000F. This steel is air-hardening but can be oil hardened. lr is an extremely deep hardening steel comparable to AISI Type 410...
Alloy Digest (1964) 13 (7): SS-158.
Published: 01 July 1964
... be heated in the range 400-600 deg. F before welding. Afrer welding, cool CO not less than 300 deg. F, heat Co 1125-1400 deg. F, hold until uniform temperature rhroughour, rhen air coql. Lime coated elecrrodes of similar composition (AISI Type 410) are recommended. The following table lists suggested...
Alloy Digest (1989) 38 (11): SS-204.
Published: 01 November 1989
... and matchingproperticsareimportanr.useW17-4PHmaterial.AISI Type 308 filler may be used where matching strength is not lwuircd. Corroslon Resistance: Oeneral corrosion x&stance of ARMCO 15-5 PH VAC CE is superior to that of AISI Types 410 and 431 and approximately equaltothatofARMC0 174 PH. Corrosionresistanceisbestin Condition H 900...
Alloy Digest (1985) 34 (9): SS-463.
Published: 01 September 1985
...). The alloy machines similar to AISI Types 410 and 420 stainless steels and its cold workability is comparable to AISI Types 403 and 422. Welding requires preheat and postweld annealing as do all 12% chromntm martensitic steels. Forms Available: Billet. bar. shapes. wire and strip. Applications: Steam turbine...
Alloy Digest (1982) 31 (7): SS-412.
Published: 01 July 1982
... condition are similar to those of AISI Type 410 when it is in the hardness range of 275-325 Brinell. An excellent surface finish can be obtained. In the annealed condition, machining rates of 40 to 60 sfpm comprise a safe range; however, 80 sfpm may be used on automatic screw machines. In the single age...
Alloy Digest (1982) 31 (9): Fe-67.
Published: 01 September 1982
... characteristics 2102 II50 7300 (50) 5700 (39) - - - - are comparable to those of AISI Type 410 Stainless Steel. Transverse Tests 1800 982 10400 (72) 10200 (70) 9100 (63) - - Workability: 2012 1100 9300 (64) 8300 (57) - - - - INCOLOY alloy MA 956 can be hot worked and cold worked to a 2102 II50 4500 (31) 3500 (24...