Skip Nav Destination
Search Results for AISI 1140
1-14 of 14 Search Results for
Alloy Digest (1984) 33 (4): CS-101.
Published: 01 April 1984
... AISI 1140 is resulfurized carbon steel. It contains nominally 0.85% manganese and a range of 0.08-0.13% sulfur to furnish tree machining characteristics. Its hardenability is relatively low. Its ductility and toughness are fairly good in the longitudinal direction but tend to be low...
Alloy Digest (1961) 10 (8): SA-118.
Published: 01 August 1961
... AISI 94B30 is a mild carbon, nickel-chromium-molybdenum-boron alloy steel having good hardenability, toughness, and shock resistance for heavy duty service. AISI 94B30H is the corresponding H-Steel which has specified hardenability limits with some modification of chemical ranges. This datasheet...
Alloy Digest (2013) 62 (3): SS-1140.
Published: 01 March 2013
..., alkali immersion before acid pickling, and if possible, shot blasting, are extremely effective. Workability: Regarding cold formability, care is required as proof stress is high and elongation is low in comparison with SUS 304 (AISI type 304SS). Weldability: In welding, the interpass temperature should...
Alloy Digest (2009) 58 (10): SA-608.
Published: 01 October 2009
... Crucible #135 Modified is a variation of AISI 4140 for nitriding the surface for hardness and abrasion resistance. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on heat treating, joining, and surface treatment. Filing Code: SA...
Alloy Digest (1987) 36 (7): TS-208.
Published: 01 July 1987
... PYROVAN is nominally a 5% chromium, air-hardening die steel with more carbon and vanadium than found in AISI Type H13. PYROVAN has improved wear resistance over conventional die steels. The optimum combination of alloying elements in this grade promotes a good balance of properties. It has...
Alloy Digest (1959) 8 (8): TS-84.
Published: 01 August 1959
... BETHLEHEM 57HW is the 9% tungsten type of hot-work tool steel, having excellent red-hardness and abrasion resistance compared with relatively good shock resistance for high operating temperatures. It corresponds to AISI Type H21 hot work tool steel. This datasheet provides information...
Alloy Digest (2014) 63 (7): SA-703.
Published: 01 July 2014
.... Materials Park, OH 44073-0002, 440-338-5151 MemberServiceCenter@asminternational.org Fax 440-338-8542 www.asminternational.org Filing Code: SA-703 Steel Alloy July 2014 Mecasteel is a series of high-strength prehardened steels based on improvement on AISI 4130 4330. The number relates to the minimum yield...
Alloy Digest (1994) 43 (8): TS-530.
Published: 01 August 1994
.... Specifications: AISI: P20 + s Code 40CrMnMoS 86 (Germany) DIN-M&No. 1.23 12 Producer: Thyssen Specialty Steels, Inc. Carol stream, IL 60188 USA (708) 682-3900 DOI: 10.31399/asm.ad.ts0530 Copyright © ASM International® 1996 Tempering Diagram 62 66 Ls IS c .- 2% E E 46 I : 42 : j : i : : j.. : i 36 :i 1...
Alloy Digest (1991) 40 (9): SS-523.
Published: 01 September 1991
.... Small welded sections may be precipitation mated directly after welding. For optimum post weld properties, particularly of large sections, solution treating plus aging is recommended. Corrosion Resistance: Corrosion resistance of LESCALLOY 13-8 MO VIM- VAR is superior to that of the AISI 400 stainless...
Alloy Digest (2019) 68 (7): TS-769.
Published: 01 July 2019
... relieving, 30 50 ºC (86 122 ºF) below highest tempering temperature. Obtainable hardness after tempering is 63 65 HRC. See also Fig. 1 3. Specification Equivalents Normalized in: DIN/EN 1.3326 HS1-4-2 AISI M52 T11352 Hot Forming Forging. 1100 900 °C (2012 1652 °F). Slow cooling in furnace...
Alloy Digest (1978) 27 (4): TS-332.
Published: 01 April 1978
...+g Inc. (High-Speed Steel; AISI Type M7) Upper Modddr, New Jersey BETHLEHEM M-7 is a high-molybdenum type of high-speed steel. Because of its high-carbon and high-vanadium contents, it has superior resistance to abrasion and is used for tools where edge toughness and wear resistance are required...
Alloy Digest (2005) 54 (3): SS-919.
Published: 01 March 2005
... International corrosion-resistant alloys elasticity hardness heat treatability indentation resistance joinability machinability physical properties RAMAX 2 tensile properties thermal properties Chemical Composition: Typical analysis is similar to AISI 420F, but modified. Ramax 2 is a Cr- Ni-Mo...
Alloy Digest (1958) 7 (12): SS-82.
Published: 01 December 1958
... carbides.) Hardens by cold work only. sTREssRELIEF:IfaKosive amdiioos oeassirocc rhe dial- inatioo of r&dual fabricacillg rrrcue5, afdaooedat 1900-2050°F. and rapid amling is recommended CO -KC oprimuo3 coaosioo proputies. hfach&sraberpoorlyduetoo&nessofma&aLIa~- inability racing is about 45% of AISI Bll12...
Alloy Digest (1957) 6 (4): TS-57.
Published: 01 April 1957
...- checking. Since Cr-MoW is an air-hardening steel, it has inherently good non-deforming characteristics typical of air- hardening steels). Specification Equivalents: AISI Type H12 ;fm.y 1312 Pressurdie No. 2 ;;ef$nY-Ludlum Chro-Mow Crucible Steel HWDl Eirth Sterling Dica B Hotform No. 1 Je=op General...