1-20 of 108 Search Results for

AISI 1025

Sort by
Journal Articles
Alloy Digest (1972) 21 (3): CS-47.
Published: 01 March 1972
... AISI 1025 is a low-to-medium-carbon steel used in the hot-worked, cold-worked, normalized or water-quenched-and-tempered condition for general-purpose construction and engineering. It is also used for case-hardened components. This datasheet provides information on composition, physical properties...
Journal Articles
Alloy Digest (1981) 30 (6): CS-86.
Published: 01 June 1981
... tools, use speed of 420 sfpm for roughing cuts of 0.150 in. with feed of 0.015 ipr; and use speed of 500 sfpm for finishing cuts of 0.025 in. with feed of 0.007 ipr. AISI 1029 steel has a wide range of applications. It has higher hardenability than AISI 1025 because of a higher manganese content...
Journal Articles
Alloy Digest (1982) 31 (5): TS-398.
Published: 01 May 1982
... CPM REX 20 is the second in a family of super high-speed steels made without cobalt. (For the first one, see CPM REX 25, Alloy Digest TS-365, July 1980.) CPM REX 20 is comparable to the AISI Type 40 series of high-speed steels, particularly AISI Type 42, in heat-treating response and tool...
Journal Articles
Alloy Digest (1987) 36 (1): TS-468.
Published: 01 January 1987
... AISI Type M7 is a molybdenum type of high-speed steel having improved cutting efficiency over AISI Type M1 high-speed steel. Type M7 was designed to offer increased wear resistance while retaining the toughness characteristic of molybdenum-type high-speed steels. It is suitable for a wide variety...
Journal Articles
Alloy Digest (1983) 32 (9): TS-417.
Published: 01 September 1983
... reserved. Published b> ISSN: 002-614X Alloy Digest, Inc. Post Gffa Box 823 Upper Montclair, New Jersey AL TECH HTB-2 (High-Speed Steel; AISI Type MO) AL TECH HTB-2 is a chromium-molybdenum-vanadium steel that is a lower molybdenum variation of the molybdenum high-speed steels. It has a high hardenability...
Journal Articles
Alloy Digest (1989) 38 (11): SS-204.
Published: 01 November 1989
..., butcorrosionresistance willbe considerably reduced. *Conditions available from the mill. Inquire regarding availabil- ity of other conditions. hkxthinabiltty: ARMCO 15-5 PH VAC CE can be machined in any heat treated Condition with excellent surface finish. In Condition A. use machining rates as for AISI Type 302 or 304...
Journal Articles
Alloy Digest (1972) 21 (11): TS-247.
Published: 01 November 1972
... AISI Type M30 is a high-speed tool steel containing 8% molybdenum and 5% cobalt. It provides long life in machining difficult-to-cut metals, such as heat-resisting alloys and superalloys, and is recommended for cutting tools requiring a good combination of suitable toughness with optimum cutting...
Journal Articles
Alloy Digest (2022) 71 (4): CS-221.
Published: 01 April 2022
... Recommended machining data Turning, cutoff and form tools Feed for cutoff tool width of Tool material Speed 1.5 mm (0.062 in.) 3 mm (0.125 in.) 6 mm (0.250 in.) ISO (AISI or C) mm/ mm/ mm/ m/min fpm rev ipr rev ipr rev ipr Material designation: 1025 Treatment condition: +AR, +N, +A, or +C. Hardness: 125 175...
Journal Articles
Alloy Digest (1979) 28 (3): TS-347.
Published: 01 March 1979
... T11313 AL Tech DBGII Filing Code: TS-347 Tool Steel MARCH 1979 - DATA ON WORLD WIDE METALS AND ALLOYS wzz- xnc. Uppsl Montdair~ New Jsxaay AL Tech DBL-3* (High-Vanadium High-Speed Steel; AISI Type MS) AL Tech DBL3 is a molybdenum-type of high-speed steel containing relatively hi@ carbon and vanadium...
Journal Articles
Alloy Digest (1989) 38 (9): SS-7.
Published: 01 September 1989
... attackbetter than any of the standard hardenable stainless steels. It is comparable to AISI Type 304 stainIess in most media. When hardened at 1025┬░F and higher temperatures, ARIvICO 17-4 PH is highly resistant to stress-corrosion cracking. In Cond. H 900 it is susceptible...
Journal Articles
Alloy Digest (2001) 50 (12): TS-595.
Published: 01 December 2001
... Crucible CPM REX M35HCHS is a modification of the AISI M2 high-speed steel by an addition of cobalt and produced by powder metallurgy to be homogeneous with good toughness. This datasheet provides information on composition, physical properties, microstructure, hardness, and elasticity. It also...
Journal Articles
Alloy Digest (2010) 59 (10): TS-693.
Published: 01 October 2010
... Equivalents: AISI Type T15 SAE Type T15 General Characteristics: REX M3-1 is a lower carbon, lower vanadium modification of M3-2 high speed steel. This lower alloy content results is better machining and grinding characteristics compared to M3-2, with a slight improvement in toughness and a moderate decrease...
Journal Articles
Alloy Digest (1982) 31 (8): TS-402.
Published: 01 August 1982
... AISI Type M33 is a heavy-duty high-speed steel; it contains 8.00% cobalt to improved red hardness. It is recommended for cutting-tool applications in which wear resistance and high temperature hardness are important characteristics. It should not be used where excessive shock and/or chatter...
Journal Articles
Alloy Digest (2005) 54 (3): TS-614.
Published: 01 March 2005
... Finkl DC is a single-vacuum melted AISI H13 type material made by the vacuum arc degassing (VAD) process. The vanadium content of 1% in addition to a high chromium (Cr 5%) and molybdenum (Mo 1.4%) promotes hot strength and wear resistance. This datasheet provides information on composition...
Journal Articles
Alloy Digest (2006) 55 (12): TS-639.
Published: 01 December 2006
... carbides, the grindability of this alloy compares favorably with that of conventional high- speed steels. Grinding wheels designed for conventional high-speed steels can be used. See Fig. 1. Specification Equivalents: AISI M4 modified General Characteristics: CPM Rex M4 HC(HS) is a high-vanadium special...
Journal Articles
Alloy Digest (1964) 13 (7): TS-148.
Published: 01 July 1964
.... Surface protection is neces- sary to prevent excessive decarburization, and salt baths are the preferred method of heat treatment where minimum grinding tolerances are encountered. Machinability: Machinability rating of the annealed material is about 40-45% of a 1% carbon tool steel and 30% of AISI...
Journal Articles
Alloy Digest (2008) 57 (2): TS-661.
Published: 01 February 2008
... Orvar 2M is a conventional tool steel of overall good ductility, toughness, weldability, and machinability. The alloy has the best overall product consistency for conventionally produced AISI H13 type tool steels. This datasheet provides information on composition, physical properties, elasticity...
Journal Articles
Alloy Digest (1970) 19 (4): TS-229.
Published: 01 April 1970
... BRAETUF is a modified version of AISI Type M44 high-speed steel having superior cutting performance and superior wear resistance. It is an ultrahard high-speed steel recommended for machining highly alloyed steels at high hardnesses and also heat teated high temperature alloys. This datasheet...
Journal Articles
Alloy Digest (2006) 55 (1): TS-626.
Published: 01 January 2006
... Micro-Melt M62 tool steel is produced by the Carpenter Micro-Melt powder metal process and is superior in toughness to conventional AISI Type M42 at similar hardness levels. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes...
Journal Articles
Alloy Digest (1985) 34 (4): TS-438.
Published: 01 April 1985
.... Enginaering Publications. Inc. WI rights reserved. Pu hlishrd h> ISSN: 002-614X Alloy Digest. Inc. 27 Canlield Street Orange. New Jersey 07050 (201) 761-1090 REX* M42 81 CPM* REX M42 (High-Speed Steel; AISI Type M42) REX M42 is a high-speed steel that can be heat treated to 68 Rockwell C hardness. Its higher...