1059, 1060, C60, C60E, and C60R are wrought high-carbon non-alloy steels that are used in the normalized, cold worked, quenched and tempered, or austempered condition. 1059, 1060, C60E, and C60R may also be flame or induction hardened. These steels are widely used for moderately and highly stressed parts that require higher strength levels than can be achieved by the lower carbon grades, and where the expense of an alloy steel is not justified. They are also used for applications where the higher carbon is needed to improve wear characteristics. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: CS-220. Producer or source: Data Survey.

1059, 1060, C60, C60E, and C60R are wrought high-carbon (carbon = 0.55–0.65%) non-alloy steels that are used in the normalized, cold worked, quenched and tempered, or austempered condition. 1059, 1060, C60E, and C60R may also be flame or induction hardened, nitrided, or nitrocarburized. These steels are widely used for moderately and highly stressed parts that require higher strength levels than can be achieved by the lower carbon grades, and where the expense of an alloy steel is not justified. They are also used for applications where the higher carbon is needed to improve wear characteristics. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming and heat treating. Filing Code: CS-259. Producer or source: Heat Treater's Guide.

ALUMINUM 1060 is a commercially pure grade of aluminum (99.6% minimum aluminum) recommended for applications requiring one or more of the following characteristics: excellent formability, excellent resistance to corrosion and excellent weldability. It has relatively low strength. It is recommended for hydrogen peroxide service and is used where minimum catalytic action is required. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-134. Producer or source: Various aluminum companies. Originally published February 1964, revised August 1979.

AISI 1060 is a high-carbon steel of low hardenability; it may be used in the as-rolled, annealed, normalized or liquid-quenched-and-tempered condition, depending on the desired properties. It is normally hardened by austenitizing and quenching in oil; however, it may be quenched in water if precautions are taken to prevent cracking. Its many uses include springs, hand tools, heavy machinery parts, shafts and agricultural machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-92. Producer or source: Carbon steel mills.

Lanxide 91-X-1060-30P is a metal-matrix composite (MMC) consisting of an aluminum-silicon magnesium alloy matrix and 30 vol.% of silicon carbide. The MMC is designed to outperform its unreinforced counterpart. It is available as sand castings with a T6 heat treatment. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on forming. Filing Code: AL-342. Producer or source: Lanxide Corporation.

SAE 1060 is a high-carbon steel of low hardenability; it may be used in the as-rolled, annealed, normalized or liquid-quenched-and-tempered condition, depending on the desired properties. It is normally hardened by austenitizing and quenching in oil; however, it may be quenched in water if precautions are taken to prevent cracking. Its many uses include springs, hand tools, heavy machinery parts, shafts and agricultural machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-116. Producer or source: Carbon steel mills.

ELKONITE G13, G14, 1060, 3042 and 3150 tungsten carbide-silver alloys have good erosion resistance and low contact resistance. The major characteristics are superior resistance to contact welding or sticking and excellent corrosion resistance. Tungsten carbide is a hard, chemically inert material and has a lower rate of oxidation than tungsten, The tungsten carbide-silver Elkonites are resistant to corrosion in high-humidity atmospheres and are superior to the other Elkonite materials in that respect. They vary in composition from 33 to 60 percent tungsten carbide by weight. This datasheet provides information on composition, physical properties, and hardness. Filing Code: W-23. Producer or source: CMW Inc.

AlcoTech Weld Metal 1100 is a 99% minimum or high-purity aluminum welding product that does not respond to heat treatment. It is used to weld the aluminum base alloys 1100, 1060, 1070, 1080 and 1350. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on heat treating and joining. Filing Code: AL-375. Producer or source: AlcoTec Wire Corporation.

Kubota alloy HN is an austenitic Fe-Ni-Cr alloy with long-term creep-rupture properties that are intermediate between those of HK40 and HP40 alloys. Carburization resistance is better than that of HK40, but oxidation resistance is generally lower, making the alloy suitable for long service at 1095 deg C (2000 deg F). This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, machining, and joining. Filing Code: SS-1060. Producer or source: Kubota Metal Corporation, Fahramet Division.

Durehete 1055 has excellent room and elevated temperature strength, good creep and relaxation resistance to 570 deg C (1060 deg F) coupled with high notch tolerance. In addition, it has thermal expansion coefficients compatible with low alloy steel turbine casing materials. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: SA-774. Producer or source: Tata Steel.

Aluminum 1xxx series alloys are nonhardenable by heat treatment. They have high purity, high conductivity, and good corrosion resistance and are easily formed. This datasheet provides information on composition, physical properties, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, machining, joining, and surface treatment. Filing Code: AL-395. Producer or source: Alcoa Engineered Products.

UNS No. G 10600 is a high-carbon steel of low hardenability. It may be used in the as-rolled, annealed, normalized or quenched and-tempered condition, depending on the desired properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-129. Producer or source: Carbon steel mills.

TIMETAL 679 is a Ti-11Sn-5Zr-2.25Al-1Mo-0.2Si alloy with three phases at room temperature. It has high strength with creep resistance. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as creep and fatigue. It also includes information on forming and heat treating. Filing Code: TI-126. Producer or source: Timet.

THYROTHERM 2713 is a tough hot work die steel with retention to tempering. This datasheet provides information on composition, physical properties, and hardness. It also includes information on heat treating, machining, joining, and surface treatment. Filing Code: TS-516. Producer or source: Thyssen Specialty Steels Inc.

Outokumpu 7026 (C 7026) is a high-strength age-hardenable CuNiSi alloy for demanding signal and power applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as deformation. It also includes information on forming. Filing Code: CU-710. Producer or source: Outokumpu American Brass Inc.

Thyroplast 2316 is a modified AISI 420F stainless combining corrosion resistance, with the free machining capability and resistance indentation in coining. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-536. Producer or source: Thyssen Specialty Steels Inc..

Ancorsteel 4300 alloy ferrous powder simulates wrought steel compositions and is a cost-effective alternative to alloys requiring secondary processing. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on heat treating and powder metal forms. Filing Code: SA-611. Producer or source: Hoeganaes Corporation.

CHATILLON 709 is a low-carbon low-alloy structural steel having good high temperature creep resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-75. Producer or source: Societe des Usines St. Jacques.

THYSSEN P20 SUPER is a modified P20 with higher carbon and nickel to improve impact strength and temper resistance. This datasheet provides information on composition, physical properties, and hardness. It also includes information on heat treating, machining, and surface treatment. Filing Code: TS-523. Producer or source: Thyssen Specialty Steels Inc.

UHB QRO 80 MICRODIZED is a chromium-molybdenum-vanadium tool steel with improved performance for tooling used at elevated temperature as in forging, extrusion and die casting. It is electro-slag refined. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-486. Producer or source: Uddeholm Aktiebolag.