1055, C55, C55E, and C55R are wrought medium-carbon non-alloy steels that are used in the normalized, cold worked, quenched and tempered, or austempered condition. 1055, C55E, and C55R may also be flame or induction hardened. These steels are widely used for moderately and highly stressed parts that require higher strength levels than can be achieved by the lower carbon grades, and where the expense of an alloy steel is not justified. They are also used for applications where the higher carbon is needed to improve wear characteristics. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-219. Producer or source: Data Survey.

1055, C55, C55E, and C55R are wrought medium-carbon (carbon = 0.50–0.60%) non-alloy steels that are used in the normalized, cold worked, quenched and tempered, or austempered condition. 1055, C55E, and C55R may also be flame or induction hardened, nitrided, or nitrocarburized. These steels are widely used for moderately and highly stressed parts that require higher strength levels than can be achieved by the lower carbon grades, and where the expense of an alloy steel is not justified. They are also used for applications where the higher carbon is needed to improve wear characteristics. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming and heat treating. Filing Code: CS-258. Producer or source: Heat Treater's Guide.

AISI 1055 is a high-carbon oil or water-hardening tool and machinery steel recommended for hand tools, agricultural tools and machinery, shafts, springs and heavy-machinery parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-49. Producer or source: Carbon steel mills.

SAE 1055 is a high-carbon oil or water-hardening tool and machinery steel recommended for hand tools, agricultural tools and machinery, shafts, springs and heavy-machinery parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: CS-117. Producer or source: Carbon steel mills.

Durehete 1055 has excellent room and elevated temperature strength, good creep and relaxation resistance to 570 deg C (1060 deg F) coupled with high notch tolerance. In addition, it has thermal expansion coefficients compatible with low alloy steel turbine casing materials. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: SA-774. Producer or source: Tata Steel.

Carpenter CTS-40CP alloy is a powder metallurgy, high-carbon chromium stainless steel designed to provide stainless properties with maximum hardness. CTS alloys are used for many blade applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and powder metal forms. Filing Code: SS-1055. Producer or source: Carpenter Specialty Alloys.

Inconel alloy 050 is an improved corrosion-resistant alloy in tubular form for down hole service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming. Filing Code: Ni-629. Producer or source: Special Metals Corporation.

Brush Alloy 390 was specifically designed for high-power applications and provides a combination of high strength and high conductivity. Increasing power requirements drive the need for lower conductor resistance to reduce joule heating. This alloy has a high thermal conductivity that is critical to thermal management. Higher power requirements create harsh environments and higher operating temperatures. Alloy 390 provides excellent stress-relaxation resistance at elevated temperatures, which increases electrical contact reliability. This datasheet provides information on composition, physical properties, and elasticity as well as fracture toughness, deformation, and fatigue. It also includes information on high temperature performance. Filing Code: CU-712. Producer or source: Brush Wellman Inc.

Boehler T552 Extra is a hardened and tempered steel with a combination of properties for stressed turbine blades. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance as well as forming, heat treating, and joining. Filing Code: SA-559. Producer or source: Böhler-Uddeholm North America.

Carpenter SCF 19 Max alloy is an austenitic, nitrogen-strengthened stainless steel of high manganese content. The alloy is used for downhole equipment and where pitting is present. See Alloy Digest SS-748, June 1999, for the original alloy. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1193. Producer or source: Carpenter Specialty Alloys.

METGLAS MBF-50A is a brazing foil in ductile, flexible metallic-glass form (A similar grade, MBF-50, is identical except that it has larger dimensional tolerances). It was developed for high-temperature service. It provides high-strength joints with superior resistance against oxidation and corrosion. This datasheet provides information on composition, physical properties, and microstructure. It also includes information on forming, heat treating, and joining. Filing Code: Ni-349. Producer or source: Allied Signal Corporation.

HASTELLOY G-50 alloy solves specific needs for applications in sour gas service when strength and corrosion resistance are needed. The alloy is available in tubular products. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance, and corrosion resistance. Filing Code: Ni-423. Producer or source: Haynes International Inc.

ATI 425 was originally developed for hot-rolled armor plate to provide ballistic protection comparable to Ti-6Al-4V and has been evaluated against a variety of projectile threats for use as armor. While processing the alloy for armor plate applications, it was observed that the material exhibited very good hot workability, permitting a more lenient window of processing parameters than necessary for Ti-6Al-4V. Versatility then expanded, and applications now exist in the chemical process industry (CPI) and in the aerospace industry. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance. Filing Code: TI-133. Producer or source: ATI Wah Chang, Allegheny Technologies. Originally published March 2004, revised July 2004.

APEX Z39-11 is an aluminum die casting alloy containing copper, silicon and zinc. It is a modification of Apex 39-11 by the addition of zinc. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting and machining. Filing Code: Al-122. Producer or source: Apex Smelting Company.

55-06 and 70-02 Ductile Dura-Bar are continuously cast ductile irons with about 50 and 75% pearlitic microstructures, respectively. 55-06 has about the same tensile strength as SAE 1045 as-hot-rolled steel. Its maximum yield strength and elongation are equivalent to a eutectoid carbon steel. 70-02 Ductile Dura-Bar has somewhat greater tensile strength up to 3 diameter and considerably higher yield strength up through 10 diameter. The elongation of 70-02 is lower than that of 55-06 because of its reduced ferrite content. This datasheet provides information on composition, microstructure, and hardness. It also includes information on heat treating. Filing Code: CI-62. Producer or source: Federal Bronze Products Inc..

ELECTRALLOY EC63000 and EC63200 are age-hardenable nickel-aluminum-bronze alloys with strength and corrosion resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CU-776. Producer or source: Electralloy, a Division of G.O. Carlson Inc.

RED X-11 is a heat treatable aluminum alloy of the silicon-copper-magnesium type. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Al-86. Producer or source: Apex Smelting Company.

AA 5456 is a wrought aluminum-magnesium alloy of relatively high strength with good welding characteristics making it suitable for structural applications. (See also Aluminum 5456, Alloy Digest Al-70, September 1958.) This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on low temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Al-316. Producer or source: Various aluminum companies.

NICROBRAZ 150 is excellent for jet engine parts and similar highly stressed components. It has good strength at lower brazing temperatures. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion resistance as well as joining. Filing Code: Ni-469. Producer or source: Wall Colmonoy Corporation.

ALUMINUM 6066 is a heat treatable aluminum alloy having good strength and excellent fabricating characteristics. It was developed as an extrusion alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-63. Producer or source: Harvey Aluminum Company.