1-14 of 14 Search Results for

1029

Sort by
Journal Articles
Alloy Digest (2023) 72 (9): CS-260.
Published: 01 September 2023
... 1029 is a wrought low-carbon (carbon = 0.25–0.31%) non-alloy steel that is used in the normalized, cold worked, or quenched and tempered condition. 1029 may also be nitrided or nitrocarburized. This steel is widely used for small, moderately stressed parts that require higher strength levels than...
Journal Articles
Alloy Digest (1981) 30 (6): CS-86.
Published: 01 June 1981
... AISI 1029 is a low-to-medium-carbon steel used in the annealed, hot-worked, normalized, cold-worked or water-quenched-and-tempered condition for a variety of engineering and construction applications. It combines good workability (hot or cold), good machinability and good weldability. Its...
Journal Articles
Alloy Digest (2009) 58 (2): SS-1029.
Published: 01 February 2009
.... Possesses excellent high-temperature oxidation resistance and low-temperature impact resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion and wear resistance as well as forming. Filing Code: SS-1029...
Journal Articles
Alloy Digest (2008) 57 (2): Mn-3.
Published: 01 February 2008
... °C °F · m circular-mil/ft Bimetal 200/72 0 32 1.09 656 20 68 1.10 662 100 212 1.20 722 200 392 1.27 764 300 572 1.33 800 High-expansive component 411 20 68 1.71 1029 Low-expansive component 430 20 68 0.80 481 Table 2 Mechanical Properties Yield strength, 0.2% Tensile strength Designation...
Journal Articles
Alloy Digest (2009) 58 (11): Fe-149.
Published: 01 November 2009
...-mil/ft) 0 °C (32 °F) 0.045 (27.1) 20 °C (68 °F) 0.050 (30.1) 100 °C (212 °F) 0.070 (42.1) 200 °C (390 °F) 0.085 (51.1) 300 °C (570 °F) 0.100 (60.2) Electrical resistivity, at 20 °C (68 °F), · m ( circular-mil/ft) High-expansive component, Designation 411 1.71 (1029) Low-expansive component...
Journal Articles
Alloy Digest (2008) 57 (5): Mn-4.
Published: 01 May 2008
...) 200 (29) See also Table 2. Table 1 Electrical Resistivity Temperature Resistivity Component Designation °C °F · m circular- mil/ft Bimetal 200R10 0 32 0.09 54 20 68 0.10 60 100 212 0.15 90 200 390 0.17 102 300 570 0.19 114 High expansive 411 20 68 1.71 1029 Low expansive 450 20 68 0.79 475...
Journal Articles
Alloy Digest (2018) 67 (7): TS-750.
Published: 01 July 2018
..., generous radii should be left on during rough machining. See also Fig. 2. 1029 °C (1885 °F), hardness, HRC 100 °C (212 °F) 63 200 °C (392 °F) 61 300 °C (572 °F) 58 400° C (752 °F) 58 500 °C (932 °F) 58 550 °C (1022 °F) 56 600 °C (1112 °F) 50 Fig. 1 Time-temperature-transformation diagram DOI: 10.31399...
Journal Articles
Alloy Digest (2013) 62 (10): TS-723.
Published: 01 October 2013
...). Heat rapidly from the preheat. Furnace or salt: 1010 1080 ºC (1850 1975 ºF). For maximum toughness: 1010 1029 ºC (1850 1885 ºF). For maximum hot hardness and heat checking resistance: 1066 1080 ºC (1950 1975 ºF). Quenching. Air, pressurized gas, warm oil, or salt. For pressurized gas quenching...
Journal Articles
Alloy Digest (2019) 68 (3): TS-760.
Published: 01 March 2019
... 699 (1200 1290) Hold time 2 hours, slowly cool to 499 °C (930 °F), then air cool Hardening (refer to TTT diagram) 927 971 °C (1700 1780 °F), hold at temperature for 30 min Furnace quench to 177 °C (350 °F), air cool to 49 °C (120 °F), immediately temper 63 HRC max quenched Tempering 100 (212) 1029...
Journal Articles
Alloy Digest (2006) 55 (1): Cu-739.
Published: 01 January 2006
... Copper bal Density, kg/m3 (lb/in.3) 8830 (0.319) Melting point, °C (°F) 1029 (1885) Electrical conductivity, 26 (45) 106 S/m (%IACS) Thermal conductivity, 235 (136) W/m . K (Btu/(ft . h . °F)) Coefficient of linear thermal 17.5 (9.7) expansion, 10 6/K (10 6/°F) See also Fig. 1...
Journal Articles
Alloy Digest (1975) 24 (7): Ni-219.
Published: 01 July 1975
....OOr. :: ,091 .oal 2x25 la.42 43.01 54 29 3.500 534 1XPij 250 I ,080 89 29 0'21% 4;.080 : 4204.ooo 1029 I 13 072 14 5 % t : .051 45 - tr: ,036 40 10 .03 21 2 z IS5 5.3 L O??b .O?Ol Oli9 .Ol59 0142 Us I jjb 5 0974 / 8ala I 1.111. 1.413. 1.X-b 1 3643 win bi5 0 35b;lOn 240.400.000 5X': 1 Y?l Y I.473...
Journal Articles
Alloy Digest (2007) 56 (7): SA-569.
Published: 01 July 2007
.... Interrupting the cutting process for more Table 1 Typical Mechanical Properties for 19 mm Plate Yield strength Tensile strength Grade MPa ksi MPa ksi Elongation, % Bend radius(a) Hardness, HB(b) JFE-EH320 962 140 1029 149 19.9 Good 377 JFE-EH360 1083 157 1246 181 20.8 Good 385 JFE-EH400 1163 169 1316 191 19.8...
Journal Articles
Alloy Digest (2003) 52 (3): Ni-604.
Published: 01 March 2003
... (29.6) Shear modulus, GPa (106 psi) 78 (11.3) Poisson s ratio 0.31 Yield strength, 0.2% offset, round 1029 (149.2) product form, mean value, MPa (ksi) Tensile strength, round product 1372 (199.0) form, mean value, MPa (ksi) Elongation, round product form, 22.3 mean value, % Reduction of area, round...
Journal Articles
Alloy Digest (1981) 30 (2): Ni-265.
Published: 01 February 1981
... 2.0s .1029 3.046 s4.19 18.4 :sE 29.60 - :: ml ;E I t 2:: 14.56 1.50 14.33 8 942 :z 9.I7.3 P:: 10.36 Key to Columns ii 1.45 E z:: 09.6 1.29 .WS 1.1s 313 1.708 ::2: 7.304 5.6e4 5s.63 EL R/ft. Gwen the length of the element, the resistance at 20°C 18 .Mo ,.02 ,.6,9 22L6 4.493 93.9, 3.600 2ooc (68oF) can...