1021, 1022, C20C, and C20GC are wrought low-carbon non-alloy steels that are used in the as rolled, normalized, cold worked, or quenched and tempered condition. They are widely used for lightly and moderately stressed parts that require higher strength levels than can be achieved by the lower carbon grades, and also for applications where a combination of low-to-moderate strength, good ductility, good cold formability, and good weldability are required. 1021 and 1022 may also be used in the carburized or carbonitrided, and subsequently quench hardened and tempered condition for parts requiring a hard, wear-resistant surface, but with little need for increased mechanical properties in the core. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-223. Producer or source: Data Survey.

1021, 1022, C20C, and C20GC are wrought low-carbon (carbon = 0.18–0.23%) non-alloy steels that are used in the as rolled, normalized, cold worked, or quenched and tempered condition. They are widely used for lightly and moderately stressed parts that require higher strength levels than can be achieved by the lower carbon grades, and also for applications where a combination of low-to-moderate strength, good ductility, good cold formability, and good weldability are required. 1021 and 1022 may also be used in the case hardened, nitrided, or nitrocarburized condition. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on forming and heat treating. Filing Code: CS-263. Producer or source: Heat Treater's Guide.

SAE 1021 is a carbon steel of relatively high manganese content which increases hardenability and hardness over that of carbon steels of lower manganese. It combines good machinability, good workability (hot or cold) and good weldability. It is used in the annealed, hot-worked, normalized, cold-worked or water-quenched-and-tempered condition for many applications. It may be used in uncarburized applications and for components case-hardened by carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-64. Producer or source: Carbon steel mills.

Carpenter 286-LNi Alloy is a precipitation-hardenable Fe-Ni-Cr alloy designed to resist corrosion while providing high strength at temperatures up to 704 deg C (1300 deg F). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming and heat treating. Filing Code: SS-1021. Producer or source: Carpenter Technology Corporation.

UNS G10210 is a carbon steel of relatively high manganese content which increases hardenability and hardness over that of carbon steels of lower manganese. It combines good machinability, good workability (hot or cold) and good weldability. It is used in the annealed, hot-worked, normalized, cold-worked or water-quenched-and-tempered condition for many applications. It may be used in uncarburized applications and for components case-hardened by carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-122. Producer or source: Carbon steel mills.

FVS 0812 is a rapidly solidified Al-Fe-V Sialloy which combines the strength, ductility and fracture toughness of conventional aerospace aluminum alloys with the high-temperature strength and stability of the FVS aluminum alloys. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, machining, and joining. Filing Code: Al-298. Producer or source: Allied-Signal Inc..

CarTech A6, also known as CarTech Vega, is an air-hardening, high-carbon (0.70%), Mn-Cr-Mo, alloy cold-work tool steel. It combines the deep-hardening and minimum size change characteristics of air-hardening tool steels with the simplicity of low-temperature heat treatment possible in many oil-hardening tool steels. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-803. Producer or source: Carpenter Technology Corporation.

TIMETAL 679 is a Ti-11Sn-5Zr-2.25Al-1Mo-0.2Si alloy with three phases at room temperature. It has high strength with creep resistance. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as creep and fatigue. It also includes information on forming and heat treating. Filing Code: TI-126. Producer or source: Timet.

Olin Brass Alloy C19020 is a copper-nickel-tin low-alloyed copper. It was developed as alloy NB-105 by Dowa Metaltech Company Limited, Japan, to meet increasing requirements of current carrying capacity, stiffness, formability and service temperature survivability being demanded by the automotive and electronic industries. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming and joining. Filing Code: Cu-905. Producer or source: Olin Brass, GBC Metals, LLC.

Olin Brass Alloy C42200 (Tradename: Lubronze) is a copper-zinc-tin alloy (tin brass). The mechanical properties and performance of C42200 are very similar to those of high-zinc brass alloys with the added benefit of improved resistance to stress relaxation. It is also a cost-effective alternative to phosphor bronze. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance as well as forming. Filing Code: Cu-904. Producer or source: Olin Brass GBC Metals, LLC.

Although LSS 718 EP is a premier aerospace nickel-base alloy, it has a significant presence in exploration and production (EP) of oil and gas and this modification is meant for those applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Ni-680. Producer or source: Latrobe Specialty Steel Company.

Wieland C22000 (C220) is a 90Cu-10Zn alloy. Known for years as Commercial Bronze, this alloy derives its name from its rich bronze color. Wieland C22000 offers a unique set of properties that makes it suitable for applications requiring deep drawing and resistance to corrosion. Its appealing color also makes it ideal for architectural applications. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Cu-919. Producer or source: Wieland Rolled Products NA.

Zr-3Nb-1Sn was developed to provide improved elevated temperature mechanical properties over the Zircaloys without reducing corrosion resistance. It is used in nuclear applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Zr-6. Producer or source: Teledyne Wah Chang Albany.

Lucefin C20 is a low-carbon, non-alloy steel that is used in the normalized, cold finished, or quenched and tempered condition. It may also be used in the carburized or carbonitrided, and subsequently quench hardened and tempered, condition for parts requiring a hard wear-resistant surface, but with little need for increased mechanical properties in the core. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-209. Producer or source: Lucefin S.p.A..

Pyromet CTX-1 is a high-strength, precipitation-hardenable superalloy exhibiting a low coefficient of thermal expansion and high strength up to about 1200 deg F. The alloy possesses high hot hardness and good thermal fatigue resistance. Its applications include components for gas turbine engines, hot-work die applications and high-pressure hydrogen environments. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-56. Producer or source: Carpenter. Originally published February 1976, revised May 1997.

EnviroBrass III is one of a series of alloys pursued by an industry consortium to develop alloys that meet the National Sanitation Foundation’s standard on low lead pickup in water supply systems. The research showed that a combination of bismuth and selenium provides the same beneficial effect on machinability as does lead. EnviroBrass III contains up to 1.2% Bi and 0.1% Se and is suitable for permanent mold and pressure die castings. SeBiLOY was the original name used to represent these alloys (see SeBiLOY I, Alloy Digest Cu-605, June 1996, and SeBiLOY II, Alloy Digest Cu-606, revised October 1996). This datasheet provides information on composition, hardness, and tensile properties. It also includes information on casting and machining. Filing Code: CU-662. Producer or source: Copper and copper alloy mills.

Nicrofer 7016TiAl (also known as alloy 751) is an age-hardening Ni-Cr-Fe alloy with both good corrosion resistance and high rupture strength. It is a slight modification of alloy Nicrofer 7016TiNb (alloy X-750) and is used in diesel exhaust valves. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-630. Producer or source: VDM Technologies Corporation.