1015, C15E, and C15R are wrought low-carbon non-alloy steels that are used in the as rolled, annealed, normalized, or cold worked condition. These steels are widely used for lightly stressed parts that require higher strength levels than can be achieved by the lower carbon grades, and also for applications where a combination of low strength, excellent cold formability, and excellent weldability are required. They may also be used in the carburized or carbonitrided, and subsequently quench hardened and tempered condition for parts requiring a hard, wear-resistant surface, but with little need for increased mechanical properties in the core. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-225. Producer or source: Data Survey.

L. Klein Declafor 1015 is a ternary copper-nickel-tin spinodal alloy that combines high strength with excellent corrosion resistance and fair machinability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Cu-940. Producer or source: L. Klein SA.

1015, C15E, and C15R are wrought low-carbon (carbon equals 0.12 to 0.18 percent) non-alloy steels that are used in the as rolled, annealed, normalized, or cold worked condition. They are widely used for lightly and moderately stressed parts that require higher strength levels than can be achieved by the lower carbon grades, and also for applications where a combination of low-to-medium strength, excellent cold formability, and excellent weldability are required. These steels may also be used in the case hardened, nitrided, or nitrocarburized condition. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on forming and heat treating. Filing Code: CS-266. Producer or source: Heat Treater’s Guide.

EVERDUR-1015 is a high-strength, corrosion-resistant copper-silicon alloy having good fabricating properties. It is nonmagnetic and fatigue resistant. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: Cu-39. Producer or source: The American Brass Company.

AISI 1015 is a low-carbon steel used in the annealed, cold-worked, hot-rolled or normalized condition for general purpose construction and engineering. It is also used for case-hardened components. It combines good machinability, good workability and good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-48. Producer or source: Carbon steel mills.

SAE 1015 is a low-carbon steel used in the annealed, cold-worked, hot-rolled or normalized condition for general purpose construction and engineering. It is also used for case-hardened components. It combines good machinability, good workability and good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-119. Producer or source: Carbon steel mills.

Ancorsteel 1015 alloy is a low apparent density water-atomized alloy. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on powder metal forms. Filing Code: CS-171. Producer or source: Hoeganaes Corporation.

Uginox MA3 (X30Cr13, No. 1.4028; AISI 420) is an age-hardenable martensitic stainless steel, mostly used where a sharp edge for cutting is needed. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1015. Producer or source: Arcelor Stainless Processing LLC.

PERMOLD H.P. 15.5 is a high purity permanent mold casting alloy that produces excellent mechanical properties after heat treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, machining, and joining. Filing Code: Al-117. Producer or source: The Permold Company.

BA.46 is a heat treatable aluminum casting alloy. It is recommended for high strength, pressure-tight castings. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: Al-24. Producer or source: The British Aluminium Company Ltd.

Alloy R-C355.0 (R4009) includes aluminum-silicon-magnesium and copper Almigweld and Altigweld filler wire with low iron content to weld alloys 355.0 and A355.0. (See also Aluminum C355, Alloy Digest A1-115, June 1962, and Aluminum C355.0, Alloy Digest Al-243, February 1983.) This datasheet provides information on composition and physical properties. It also includes information on joining. Filing Code: Al-327. Producer or source: AlcoTec Wire Corporation.

Ovako 225A is an alloy designed for nitriding applications such as piston rods. This datasheet provides information on composition and tensile properties. It also includes information on forming and machining. Filing Code: SA-549. Producer or source: Ovako Steel Inc.

TIMETAL 367 is a Ti-6Al-7Nb medium-strength alpha-beta alloy for surgical implants. The alloy is analogous to TIMETAL 367 6-4 (revised as Ti-6Al-4V, Alloy Digest Ti-66, September 1992), but with niobium as the more biocompatible alloying element. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on heat treating. Filing Code: TI-123. Producer or source: Timet.

Copper Alloy No. C64400 is an aluminum silicon bronze sheet and strip alloy commonly used in quarter hard, half hard and hard tempers with or without a prior precipitation treatment. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fatigue. It also includes information on forming and joining. Filing Code: Cu-559. Producer or source: Copper and copper alloy mills.

SUPEC G401 AND G402 are resins based on polyphenylene sulfide (PPS) technology. They combine long-and short-term heat resistance with broad chemical resistance and they are inherently flame retardant. This datasheet provides information on physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. Filing Code: P-3. Producer or source: G. E. Plastics.

TIMETAL 834 is a Ti-5.8Al-4Sn-3.5Zr-0.7Nb-0.5Mo-0.35Si-0.06C alloy with high strength and creep resistance up to 593 C (1100 F). The alloy is workable and weldable. It is used in the aerospace industry for rings and compressor disks. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance as well as heat treating. Filing Code: TI-116. Producer or source: Timet.

Ovahyd 450 is a steel developed for highly stressed cylinder and piston rod applications in the hydraulic industry. The yield strength (MPa) corresponds to the alloy name. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on forming, machining, and joining. Filing Code: SA-544. Producer or source: Ovako Steel Inc.

FAGERSTA-D65 is an oil or air hardening tool steel recommended for punching, shearing and stamping tools requiring high abrasion resistance and for cold working large sections of metal. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-226. Producer or source: Fagersta Steels Inc..

TIMETAL 829 is a Ti-5.5Al-3.5Sn-3Zr-1Nb-0.25Mo-0.3Si near-alpha titanium alloy that is weldable and has high strength and is a creep resistant high temperature alloy. The major application is as gas turbine engine components. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on forming and heat treating. Filing Code: TI-118. Producer or source: Timet.

Ovako 42CrMo4 is a quenched-and-tempered steel with high strength and good toughness. The alloy is also available with increased sulfur content to improve machinability. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-573. Producer or source: Ovako Steel Inc.