Cryodur 2833 is a wear-resistant water-hardening steel with resistance to overheating. Applications include cold heading dies; first and finish upsetting punches; cold stamps; dies for the manufacturing of screws, rivets, and bolts; and compression pistons. This datasheet provides information on composition and physical properties. It also includes information on heat treating. Filing Code: TS-777. Producer or source: Schmolz + Bickenbach USA Inc..

SY286 is age hardenable and corrosion resistant. Because of its strength, it is often used as bolting material. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-993. Producer or source: Metalimphy Precision Alloys Inc.

Bethlehem Lukens Plate (BLP) C1119/C1144 Modified steels are resulfurized carbon steels containing nominally 1.15% Mn and 0.20 to 0.33% S to provide a free-machining steel. They are recommended especially for high-production automatic machining. They have relatively low hardenability. Their ductility and toughness are reasonably good in the longitudinal direction, but they tend to be low in the transverse direction. The many uses include mining equipment, bushings, bolts, and gears. This datasheet provides information on composition, physical properties, microstructure, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: SA-436. Producer or source: International Steel Group Inc. Originally published February 1989, revised February 2004.

Nicrofer 7016 TiNb is an austenitic age-hardening Ni-Cr-Fe alloy containing Ti, Nb, and Al. High tensile strength is combined with good weldability. This aerospace alloy finds applications in rocket exhaust heat exchangers, springs, bellows, and bolts. This datasheet provides information on composition, physical properties, microstructure, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ni-534. Producer or source: VDM Technologies Corporation.

Nimonic alloy 901 is a nickel-base alloy strengthened by additions of molybdenum, titanium, and aluminum. It possesses high creep and rupture strength from 1000 to 1400 deg F. Applications include components for gas turbines, bolting, and valve stems for power applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance as well as heat treating. Filing Code: Ni-339. Producer or source: Inco Alloys International Inc. Originally published September 1986, revised April 1996.

SAE 1030 is a plan carbon steel containing nominally 0.30% carbon. It is used in the hot-rolled, normalized, oil-quenched-and-tempered or water-quenched-and-tempered condition for general-purpose engineering and construction. It provides medium strength and toughness at low cost. Among its many uses are axles, bolts, gears and building sections. All data cited herein are on a single heat of fine-grain steel, 5-7 grain size. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-128. Producer or source: Carbon steel mills.

AISI 8642 is a triple-alloy steel that can be hardened by austenitizing and quenching in oil. This steel has moderate hardenability with relatively high strength and toughness, especially in the quenched-and-tempered condition. It is used in a wide range of components, parts and tools; examples are bolts, shafts, gears, wrenches, axles and housings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating, machining, joining, and surface treatment. Filing Code: SA-440. Producer or source: Alloy steel mills and foundries.

UNS No. G10450 is a plain carbon steel containing nominally 0.45% carbon. It may be used in four conditions: hot rolled, normalized, oil quenched and tempered or water quenched and tempered. It is a general-purpose construction and engineering steel and provides medium strength and medium toughness at low cost. It is suitable for flame- or induction-hardened parts. Among its many uses are axles, shafts, bolts, rods, pipe, wire and tools. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-115. Producer or source: Carbon steel mills.

SAE 1025 is a plain carbon steel for general-purpose construction and engineering. It is used in the hot-worked, cold-worked, normalized or water-quenched-and-tempered condition. It also is carburized and used for case-hardened parts. Its many uses include bolts, forgings, axles, machinery components, cold-extruded parts, pressure vessels, case-hardened parts, chain and sprocket assemblies, spinning tools and permanent-mold castings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-114. Producer or source: Carbon steel mills.

SAE 1345 is a through-hardening, manganese alloy steel with intermediate hardenability. It is most commonly used where good strength is needed but low-to-medium toughness is sufficient. Its wide range of uses in tools and machinery includes hand tools, gears, shafts, bolts and housings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-425. Producer or source: Alloy steel mills and foundries.

Copper Alloy No. C35600 is a brass containing an extra-high level of lead. It is suitable for high-speed screw-machine work. It has moderate strength and ductility which are dependent on how much it has been hardened by cold working. Typical uses include clock plates and nuts, clock and watch backs, clock gears and channel plate for industrial use. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-522. Producer or source: Brass mills.

SAE 1020 is a low-carbon steel combining good machinability, workability and weldability. It is carburized for use in case-hardened components and it is used for a wide range of applications in the hot-worked, cold-worked, normalized or quenched-and-tempered conditions. Its many uses include bolts, rods, plate applications, machinery components, case-hardened parts, spinning tools and trimming dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: CS-113. Producer or source: Carbon steel mills.

SAE 4145 is a through-hardening, medium-carbon chromium-molybdenum alloy steel of high hardenability. It is recommended for heavy-duty service and is suitable for a wide variety of engineering uses. Its many applications include gears, axles, flanges, machine tool parts, nitrided parts, bolts, connecting rods, sprockets and valve seats. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-420. Producer or source: Alloy steel mills and foundries.

AISI 1017 is a carbon steel with a relatively low manganese content (0.30-0.60%); this contributes to relatively low hardenability in all applications and increased ductility with decreased hardness and strength in the core of carburized material and in uncarburized uses. It combines good hot and cold workability, good machinability and good weldability. Typical applications are carburized parts, bolts, trusses and cold-extruded parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-109. Producer or source: Carbon steel mills.

UNS No. G10460 is a general-purpose construction and machinery steel. It can be used in a variety of conditions: hot rolled, annealed, normalized, oil quenched and tempered, water quenched and tempered or austempered. It furnishes medium strength and toughness at a low cost. It is frequently used for flame or induction-hardened parts. Its many uses include axles, bolts, pins, shafts and forgings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-104. Producer or source: Carbon steel mills.

Copper Alloy No. C90900 is a cast copper-tin alloy which also is known by names formerly used (but not recommended): Tin Bronze, 199 and 87-13-0-0. It is a medium-strength alloy and has a good combination of strength, ductility and resistance to corrosion. Its uses include bearings, bushings, valves, nuts and marine hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-494. Producer or source: Copper alloy foundries.

Copper Alloy No. C61300 is a copper-aluminum-tin alloy. It is characterized by medium strength, medium ductility and a good capacity for being hot worked or cold worked. It has good resistance to corrosion. Its many applications include bolts, nuts, corrosion-resistant vessels, machine parts, piping systems, marine fasteners and blending chambers for munitions. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-493. Producer or source: Copper and copper alloy mills.

UNS No. G86500 is a triple-alloy steel designed for highly efficient utilization of the alloying elements to increase hardenability and strength. It is an oil-hardening type and is suitable for many machine and tool components. Specific applications include gears, shafts, bolts, wrenches, studs and tool forgings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-407. Producer or source: Alloy steel mills and foundries.

MUELLER Alloy 3602 is a leaded brass of moderate strength and ductility. It is suitable for moderate thread rolling. Also, because of its free-cutting characteristics, it is suitable for high-speed screw-machine products. Among its many applications are hardware, unions, bolts, screws and nuts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-489. Producer or source: Mueller Brass Company.

AISI 1151 is a resulfurized carbon steel containing nominally 0.85% manganese and a range of 0.08-0.13% sulfur to make it free machining. Its ductility and toughness are reasonably good in the longitudinal direction but are low in the transverse direction. It is recommended highly for high-production automatic machine products. Its uses include axles and shafts, spindles, gears, bolts and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-103. Producer or source: Carbon steel mills.