ISO 185/JL/225 is an intermediate-tensile-strength gray cast iron that has a predominantly pearlitic matrix, and a tensile strength of 225–325 MPa (33-47 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, ISO 185/JL/225 contains lower carbon and silicon contents, while still maintaining excellent thermal conductivity, damping capacity, and machinability. This datasheet provides information on composition, physical properties, tensile properties, and compressive strength as well as fatigue. It also includes information on heat treating. Filing Code: CI-73. Producer or source: International Organization for Standardization (ISO).

MHZ 500 (mininum yield strength of 500 MPa) is one of a series of microalloyed cold forming steels. The high-strength properties result from precipitation hardening thanks to finely-dispersed carbonitrides and a fine-grained microstructure. Even very small amounts of the elements titanium and/or niobium in the region of 0.01% result in a significant increase in the yield point and tensile strength. This datasheet provides information on composition and tensile properties as well as fatigue. It also includes information on forming and joining. Filing Code: SA-837. Producer or source: ThyssenKrupp Steel Europe AG.

MHZ 460 (mininum yield strength of 460 MPa) is one of a series of microalloyed cold forming steels. The high-strength properties result from precipitation hardening thanks to finely-dispersed carbonitrides and a fine-grained microstructure. Even very small amounts of the elements titanium and/or niobium in the region of 0.01% result in a significant increase in the yield point and tensile strength. This datasheet provides information on composition and tensile properties as well as fatigue. It also includes information on forming and joining. Filing Code: SA-835. Producer or source: ThyssenKrupp Steel Europe AG.

MHZ 420 (mininum yield strength of 420 MPa) is one of a series of microalloyed cold forming steels. The high-strength properties result from precipitation hardening thanks to finely-dispersed carbonitrides and a fine-grained microstructure. Even very small amounts of the elements titanium and/or niobium in the region of 0.01% result in a significant increase in the yield point and tensile strength. This datasheet provides information on composition and tensile properties as well as fatigue. It also includes information on forming and joining. Filing Code: SA-831. Producer or source: ThyssenKrupp Steel Europe AG.

MHZ 380 (mininum yield strength of 380 MPa) is one of a series of microalloyed cold forming steels. The high-strength properties result from precipitation hardening thanks to finely-dispersed carbonitrides and a fine-grained microstructure. Even very small amounts of the elements titanium and/or niobium in the region of 0.01% result in a significant increase in the yield point and tensile strength. This datasheet provides information on composition and tensile properties as well as fatigue. It also includes information on forming and joining. Filing Code: SA-828. Producer or source: ThyssenKrupp Steel Europe AG.

UGI 4362 is an austenitic ferritic duplex stainless steel with good strength and corrosion resistance. It has superior yield strength, ultimate tensile strength, and corrosion resistance compared with 316L stainless. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: SS-1289. Producer or source: Schmolz + Bickenbach USA Inc..

Alloy CuSn5 (UNS C51000) is a high-performance copper alloy. The alloy is characterized by good tensile strength, good electrical conductivity, and very good resistance to stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating. Filing Code: Cu-871. Producer or source: Gebr. Kemper GmbH + Company KG Metallwerke.

Micro-Melt signifies powder metallurgy. The alloy is nonmagnetic with excellent tensile strength, ductility, and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and powder metal forms. Filing Code: SS-1231. Producer or source: Carpenter Technology Corporation.

Docol 1000 DPZE is a high-strength steel with a microstructure that contains ferrite, which contributes to good formability, and martensite, which is hard and contributes to the strength of the material. These steels are designed according to their lowest tensile strength. DP stands for dual phase and the ZE suffix denotes a zinc coating. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on surface qualities as well as forming. Filing Code: SA-715. Producer or source: SSAB Swedish Steel Inc..

DOCOL 1000 LCEZE high-strength steel has with a microstructure that contains ferrite, which is soft and contributes to good formability; and martensite, which is hard and contributes to the strength of the material. These steels are designed according to their lowest tensile strength. The ZE suffix denotes a zinc coating. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on forming, joining, and surface treatment. Filing Code: SA-701. Producer or source: SSAB Swedish Steel Inc..

Docol 1000 LCE is a high-strength steels with a microstructure that contains ferrite, which is soft and contributes to good formability, and martensite, which is hard and contributes to the strength of the material. These steels are designed according to their lowest tensile strength. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on forming and joining. Filing Code: SA-694. Producer or source: SSAB Swedish Steel Inc.. See also Alloy Digest SA-615, March 2010.

Sandvik SanRig 80, an austenitic stainless steel, has high fatigue and tensile strength for marine applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming. Filing Code: SS-1168. Producer or source: Sandvik Steel Company.

ToughMet 2 CX is a Cu-9Ni-6Sn alloy that combines low coefficient of friction with wear resistance. ToughMet alloys are a line of spinodal hardened Cu-Ni antigalling alloys for bearings capable of performing with a variety of shafting materials and lubricants. The alloys combine a high lubricity with wear resistance in these severe loading conditions. ToughMet 2CX in the cast and spinodally hardened (CX) condition exhibits tensile strength in excess of 724 MPa (105 ksi) and hardness exceeding HRC 27 with excellent machinability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming. Filing Code: Cu-819. Producer or source: Materion Brush Performance Alloys.

Ansonia alloy ACB Hitenso C16200 is a cadmium-containing copper alloy used to increase tensile strength while maintaining electrical conductivity. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-805. Producer or source: Ansonia Copper & Brass Inc..

ATI S240 is an age-hardening martensitic stainless steel with strength and toughness comparable to other commercial steels in the class, but with improvements. The 240 in the title is the tensile strength. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1107. Producer or source: ATI Allvac.

Dogal 600 CP and 780 DP are high strength steels that are hot-dip galvanized for protection. The designation relates to the lowest tensile strength. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on surface qualities as well as forming, joining, and surface treatment. Filing Code: CS-166. Producer or source: SSAB Hardox Corporation.

Wieland-FX9 is a high-manganese bronze alloy that has good strength and is available in numerous cold work tempers related to its minimum tensile strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Cu-801. Producer or source: Wieland Metals Inc..

Dogal 1000 DPX is a high strength steel with a microstructure that contains ferrite, which is soft and formable, and martensite, which is hard and contributes to the strength of the steel. The designation relates to the lowest tensile strength. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on forming, joining, and surface treatment. Filing Code: CS-163. Producer or source: SSAB Swedish Steel Inc..

Dogal 800 DPX is a high strength steel with a microstructure that contains ferrite, which is soft and formable and martensite, which is hard and contributes to the strength of the steel. The designation relates to the lowest tensile strength. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on forming, joining, and surface treatment. Filing Code: CS-162. Producer or source: SSAB Swedish Steel Inc..

Dogal 600 and 800 DP are high-strength steels with a microstructure that contains ferrite, which is soft and formable, and martensite, which is hard and contributes to the strength of the steel. The designation relates to the lowest tensile strength. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, joining, and surface treatment. Filing Code: CS-160. Producer or source: SSAB Swedish Steel Inc. and SSAB Swedish Steel.