Strenx™ 1100 Plus is a high-strength, hot-rolled, quenched and tempered, structural steel with a minimum yield strength of 1100 MPa (160 ksi) and very good weld performance. The strength, elongation, and impact toughness of weldments fulfill minimum guarantees of the base metal. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on machining and joining. Filing Code: SA-856. Producer or source: SSAB Swedish Steel, Inc..

ALUMINUM ALLOY 201.0 is a structural casting alloy available as sand, permanent mold and investment castings. It is used in structural casting members, applications requiring high tensile and yield strengths with moderate elongation, and where high strength and energy-absorption capacity are needed. This datasheet provides information on composition, physical properties, and elasticity as well as creep and fatigue. It also includes information on high temperature performance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: AL-336. Producer or source: Various aluminum companies.

ALUMINUM ALLOY(S) 206.0 and A206.0 are structural castings in the heat treated temper for applications requiring high tensile and yield strengths with moderate elongation. This datasheet provides information on composition, physical properties, tensile properties, and compressive, shear, and bearing strength as well as fatigue. It also includes information on as well as heat treating. Filing Code: AL-335. Producer or source: Various aluminum companies.

55-06 and 70-02 Ductile Dura-Bar are continuously cast ductile irons with about 50 and 75% pearlitic microstructures, respectively. 55-06 has about the same tensile strength as SAE 1045 as-hot-rolled steel. Its maximum yield strength and elongation are equivalent to a eutectoid carbon steel. 70-02 Ductile Dura-Bar has somewhat greater tensile strength up to 3 diameter and considerably higher yield strength up through 10 diameter. The elongation of 70-02 is lower than that of 55-06 because of its reduced ferrite content. This datasheet provides information on composition, microstructure, and hardness. It also includes information on heat treating. Filing Code: CI-62. Producer or source: Federal Bronze Products Inc..

BRUSH WELLMAN SR-200E is a grade of beryllium strengthened by a dispersion of beryllium oxide (2.0%). It has relatively high strength and ductility (a minimum of 10% elongation). Its uses include missiles, space vehicles, structural parts on both commercial and military satellites and optical support benches. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Be-5. Producer or source: Brush Wellman Inc..

The 50 Nickel-Iron Alloy is recommended for glass-to-metal seals. It is used with such glasses as Types 0120 and 9010 that have higher than normal thermal expansion and with certain ceramics. It is used in a number of applications where expansion must be almost linear to 1000 F. The 50 Nickel-Iron Alloy has relatively good mechanical properties; in fact, at room temperature it has a tensile strength of 80,000 psi and an elongation of 35%. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-276. Producer or source: Mills that produce iron-nickel alloys.

RMI 5A1-2.5Sn ELI (ELI = Extra Low Interstitials) is an alpha titanium alloy that was developed for use at cryogenic temperatures. It has a guaranteed minimum yield strength of 100,000 psi at room temperature with good ductility and formability; its yield strength and elongation increase substantially as temperature is lowered. It is used successfully for high-pressure vessels at temperatures below -320 F. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-75. Producer or source: RMI Company.

TECHALLOY GLASSEAL 52 is a nickel-iron alloy produced for glass-to-metal seals with higher than normal thermal-expansion glasses such as Types 0120 and 9010, and certain ceramics. It has relatively good mechanical properties: a tensile strength of 80,000 psi and an elongation of 35%. It is used in a number of applications where expansion is required to be almost linear to 1000 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-260. Producer or source: Techalloy Company Inc..

ZA-12 is a zinc-aluminum-copper foundry alloy recommended for general-purpose castings of high strength at moderate cost. Its properties are similar to those of cast iron; however, it was designed for use in nonferrous foundries to compete with cast-iron, bronze, brass and aluminum castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion and wear resistance as well as casting, forming, heat treating, machining, and surface treatment. Filing Code: Zn-31. Producer or source: Eastern Alloys Inc.. See also Alloy Digest Zn-49, May 1990.

SILAFONT-5 is a heat treatable aluminum casting alloy recommended for sand and die castings. It has high strength, medium elongation, good corrosion resistance. It is suited for castings subject to impact and shock. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-172. Producer or source: Swiss Aluminium Ltd.

ELECTRON Z5Z is a heavy duty magnesium alloy for structural purposes at normal temperatures. It is characterized by high yield strength with good elongation, high fatigue strength with very low notch sensilivity, and uniform strength in varying sections. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Mg-5. Producer or source: Aluminum Laboratories Ltd. Originally published April 1953, revised June 1959.

DOWMETAL AZ91C is a heat treatable magnesium base alloy suitable for sand and permanent mold castings. It combines good tensile strength and yield strength with good elongation and is used in both the solution heat treated condition (T4) and in the solution heat treated plus artificially aged condition (T6). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Mg-25. Producer or source: The Dow Chemical Company, Bay City Division.

AMPCO METAL-16 is an aluminum bronze combining strength with good elongation, along with good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as machining and joining. Filing Code: Cu-33. Producer or source: Ampco Metal Inc..