Zapp Ti 1, Ti 2, Ti 3, and Ti 4 are commercially pure (CP), unalloyed titanium grades that are used in applications where excellent corrosion resistance combined with moderate strength, high ductility, and good weldability are required. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-170. Producer or source: Zapp AG.

Kaiser Alloy 1100 is in the commercially pure wrought family (1000 or 1xxx series) of aluminum alloys. It is typically used in applications requiring maximum ductility and relatively low strength. It has good corrosion resistance, workability, and weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as machining and joining. Filing Code: Al-459. Producer or source: Kaiser Aluminum Corporation.

Electralloy Nitronic 33 was created with a high-yield strength, excellent toughness, and ductility. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as joining. Filing Code: SS-1295. Producer or source: Electralloy, a Division of G.O. Carlson Inc..

Micro-Melt signifies powder metallurgy. The alloy is nonmagnetic with excellent tensile strength, ductility, and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and powder metal forms. Filing Code: SS-1231. Producer or source: Carpenter Technology Corporation.

Böhler (or Boehler) T200 is an age-hardenable austenitic Fe-Ni-Cr alloy designed for service up to 704 deg C (1300 deg F) on jobs requiring high strength and good corrosion resistance at the operating temperature. The alloy offers high ductility in notched sections. The alloy is used in jet engines and superchargers for various high-temperature components and is one of the few age-hardenable alloys used for bolting in the ASME Boiler and Pressure Vessel Code. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on forming, heat treating, and machining. Filing Code: SS-1205. Producer or source: Böhler-Uddeholm Specialty Metals Inc..

Sandvik Bioline Ti6Al4V ELI is an alpha-beta titanium alloy used mainly for medical implant applications. It is an extra low interstitial alloy with a high purity, which confers improved ductility and fracture toughness. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on forming and machining. Filing Code: Ti-157. Producer or source: Sandvik Materials Technology.

Questek QT-Ti-1A, 2A, and 2B are three developed castable titanium alloys under U.S. Army-funded SBIR Phase I and II programs to incorporate lower-cost raw materials and exhibit greater strength and/or ductility than Ti-6-4. This datasheet provides information on microstructure and tensile properties. It also includes information on high temperature performance as well as casting. Filing Code: Ti-155. Producer or source: QuesTek Innovations, LLC.

CSS-42L is a stainless steel containing good contents of cobalt and molybdenum. It can be case hardened to very high levels while maintaining good interior toughness and ductility. This datasheet provides information on composition and physical properties as well as fracture toughness. It also includes information on forming and heat treating. Filing Code: SS-1171. Producer or source: Latrobe Specialty Steel Company.

Incoloy Alloy 945 is a nickel-base precipitation-strengthened alloy that provides 860 MPa (125 ksi) minimum yield strength and an excellent combination of ductility and impact strength. The nickel content is sufficient to provide protection against chloride-ion stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-666. Producer or source: Special Metals Corporation. Originally published December 2008, revised April 2014.

Ansonia alloy ACB C18150 is an age-hardenable zirconium chromium copper alloy with high electrical conductivity, hardness, and ductility; moderate strength; and excellent resistance to softening at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-828. Producer or source: Ansonia Copper & Brass Inc..

Böhler (or Boehler) W405 is a hot work steel with a great combination of hardness, strength, toughness, ductility, and thermal conductivity to resist typical damage mechanisms in applications. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-722. Producer or source: Böhler-Uddeholm North America.

Inconel Filler Metal 52MSS contains about 2.0–2.5 wt.% Nb and 3.0–4.0 wt% Mo, which have been shown to improve resistance to ductility dip cracking, and has reduced aluminum and titanium, which provide the ability to deposit very clean weld deposits without the floating oxide impurities of other previously used filler metals. This datasheet provides information on composition and tensile properties. It also includes information on forming, heat treating, and joining. Filing Code: Ni-706. Producer or source: Special Metals Welding Products Corporation.

ATI 412 alloy is a corrosion-resistant, dual-phase, 12% Cr stainless steel that offers a good combination of strength, ductility, toughness, wear resistance, and weldability. This alloy offers potential cost savings compared to less corrosion- and wear-resistant materials based on its longer service life and the possibility of using thinner, lighter sections for a given application. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming and joining. Filing Code: SS-1130. Producer or source: Allegheny Ludlum.

Tungum alloy combines an unusually high strength-to-weight ratio, with ductility, excellent corrosion resistance, and good fatigue properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming. Filing Code: Cu-806. Producer or source: Tungum Ltd.

HPM 270 Nickel is a high purity nickel free from nonmetallic inclusions. Its good ductility easily permits significant cold reduction without annealing. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and joining. Filing Code: Ni-686. Producer or source: Hamilton Precision Metals.

Sandmeyer alloy 825 is a nickel alloy high in chromium and molybdenum with good corrosion resistance and ductility. The alloy has enough nickel (42%) to be relatively free from chloride-ion stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-687. Producer or source: Sandmeyer Steel Company.

Kubota Alloy CK-20 is an iron-chromium-nickel alloy that has other variations with lower carbon and addition of molybdenum. The alloy provides good resistance to dilute sulfuric acid. The nearest wrought equivalent is AISI Type 310 stainless. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on casting and joining. Filing Code: SS-1082. Producer or source: Kubota Metal Corporation, Fahramet Division.

HPM MP35N-LTi is a nonmagnetic nickel-cobalt-chromium-molybdenum alloy that has excellent corrosion resistance, can obtain ultrahigh tensile strengths 2068 MPa (300 ksi) through work hardening and aging, and has good toughness and ductility. Applications include electrical components, springs, and instrument parts in medical, chemical, food processing and marine environments. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming. Filing Code: CO-120. Producer or source: Hamilton Precision Metals.

Incoloy alloy 25-6HN is a 6% Mo superaustenitic stainless steel. It offers an excellent combination of strength, ductility, and resistance to corrosion by a variety of media at an economical price. It is readily formed and welded. The properties of the alloy are enhanced by its content of nitrogen. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: SS-1056. Producer or source: Special Metals Corporation.

Nikrothal 20 is an austenitic nickel-chromium alloy (NiCr alloy) for use at temperatures up to 1050 C (1920 F). The alloy is characterized by high resistivity and moderate oxidation resistance. It has good ductility after use and excellent weldability. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming. Filing Code: SS-1044. Producer or source: Kanthal AB.