1016, C16E, and C16R are wrought low-carbon (carbon = 0.12–0.18%) non-alloy steels that are used in the as-rolled, annealed, normalized, or cold worked condition. They are widely used for lightly and moderately stressed parts that require higher strength levels than can be achieved by the lower carbon grades, and also for applications where a combination of low-to-medium strength, excellent cold formability, and excellent weldability are required. These steels may also be used in the case hardened, nitrided, or nitrocarburized condition. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on low and high temperature performance as well as forming and heat treating. Filing Code: CS-269. Producer or source: Heat Treater's Guide Data Sheet.

Deutsche Edelstahlwerke Cryodur 2381 is a high-carbon, silicon-molybdenum-vanadium alloy cold-work tool steel. This high-tensile special steel exhibits good resistance to twisting. This datasheet provides information on composition, physical properties, and hardness as well as fatigue. It also includes information on heat treating. Filing Code: TS-841. Producer or source: Deutsche Edelstahlwerke Specialty Steel.

Cleveland-Cliffs 18 SR is a ferritic stainless steel that is especially valuable for applications requiring high-temperature scaling resistance. Its properties, under cyclic conditions, are superior to those of types 409, 430, 304, 309, and 310 stainless steels. In addition, it is more economical than many of the stainless steels that are intended for high temperature applications. Unlike many of the straight chromium alloys, Cleveland-Cliffs 18 SR is readily welded by conventional methods. It is not subject to troublesome embrittlement or loss of corrosion resistance in the heat-affected zone. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low temperature performance, high temperature performance, and corrosion resistance as well as forming and joining. Filing Code: SS-1367. Producer or source: Cleveland-Cliffs Inc.

1012 and S12C are wrought low-carbon (carbon = 0.10–0.15 percent) non-alloy steels that are used in the as rolled, annealed, normalized, or cold worked condition. These steels are characterized by low strength, high ductility, excellent cold formability, and excellent weldability. Within the carbon range of these steel grades, strength and hardness will increase with increase in carbon content and with cold work. Such increases in strength are at the sacrifice of ductility or the ability to withstand cold deformation. Grades 1012 and S12C are widely used for lightly stressed parts that require higher strength levels than can be achieved by the lower carbon grades and for applications where cold formability is the primary requisite. They are less expensive than 1008 and can be used when the requirements for cold forming are less exacting. 1012 and S12C may also be used in the case hardened, nitrided, or nitrocarburized condition. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on low and high temperature performance as well as forming and heat treating. Filing Code: CS-268. Producer or source: Heat Treater's Guide.

Austral Wright C26000 (70-30 Brass) is a copper-zinc alloy. It has the distinctive clear bright yellow color normally associated with brass. Austral Wright C26000 possesses an excellent combination of strength and ductility. This grade is the most widely available copper alloy in the sheet form. It is often used where its deep drawing qualities are needed. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-944. Producer or source: Austral Wright Metals.

1006 is a wrought low-carbon (carbon ≤ 0.08%) non-alloy steel that is used in the as rolled, annealed, normalized, or cold worked condition. This steel is characterized by low strength, high ductility, excellent cold formability, and excellent weldability. Within the carbon range of this steel grade, both strength and hardness will increase with increase in carbon and with cold work. Such increases in strength are at the sacrifice of ductility or the ability to withstand cold deformation. 1006 is widely used for lightly stressed parts where cold formability or drawability is the primary requisite. In general, it is not intended for heat treatment after cold working. 1006 may, however, be used in the case hardened, nitrided, or nitrocarburized condition. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on forming and heat treating. Filing Code: CS-267. Producer or source: Heat Treater's Guide.

ACO Eurobar EN-GJS-400-18C-LT is a ferritic spheroidal graphite cast iron that is produced by the continuous casting process. It has a minimum tensile strength of 400 MPa (58 ksi) and a minimum elongation of 18%. It has a tensile strength exceeding that of the highest-tensile-strength grade of gray cast iron, together with much higher elongation and impact resistance. It is specifically designed to provide good impact properties at low temperature. This datasheet provides information on physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low temperature performance as well as casting, heat treating, and machining. Filing Code: CI-109. Producer or source: ACO Eurobar GmbH.

Deutsche Edelstahlwerke Cryodur 2362 is a high-carbon, chromium-molybdenum-vanadium alloy cold-work tool steel with high tempering resistance. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fatigue. It also includes information on wear resistance as well as forming and heat treating. Filing Code: TS-840. Producer or source: Deutsche Edelstahlwerke Specialty Steel GmbH.

VDM 40 B is an austenitic iron-nickel-chromium-silicon-lanthanum alloy that is suitable for heating elements. It is characterized by excellent oxidation resistance, high resistivity, good sag resistance, and superior mechanical properties at high temperatures in comparison to other heating element alloys. VDM 40 B is less expensive than 60Ni, the traditional material for heating elements. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance, corrosion resistance, and surface qualities as well as forming and heat treating. Filing Code: SS-1366. Producer or source: VDM Metals GmbH.

Atlas 316 is a chromium-nickel-molybdenum austenitic stainless steel, second only to Atlas 304 in commercial importance. The molybdenum gives Atlas 316 better overall corrosion resistant properties than type 304 austenitic stainless steel, particularly higher resistance to pitting and crevice corrosion in chloride environments. It is readily brake or roll formed, welded, soldered, and cut by both thermal and mechanical methods. The austenitic structure gives excellent toughness, even down to cryogenic temperatures. Atlas 316L, the low carbon version of Atlas 316, is highly resistant to sensitization (grain boundary carbide precipitation) and so is extensively used in heavy gauge welded components; about 5 mm, 0.2 in., and over. Atlas 316H, with its higher carbon content, has some application at elevated temperatures, as does stabilized type 316Ti. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-1365. Producer or source: Atlas Steels.

1015, C15E, and C15R are wrought low-carbon (carbon equals 0.12 to 0.18 percent) non-alloy steels that are used in the as rolled, annealed, normalized, or cold worked condition. They are widely used for lightly and moderately stressed parts that require higher strength levels than can be achieved by the lower carbon grades, and also for applications where a combination of low-to-medium strength, excellent cold formability, and excellent weldability are required. These steels may also be used in the case hardened, nitrided, or nitrocarburized condition. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on forming and heat treating. Filing Code: CS-266. Producer or source: Heat Treater’s Guide.

Austral Wright Alloy B25 (UNS C17200) is a wrought beryllium copper alloy. It provides the highest strength of any copper alloy, with electrical conductivity considerably greater than that of other high-strength copper alloys. Since it is heat treated after forming, it provides excellent formability and ductility. This alloy features good stress relaxation resistance and high fatigue strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Cu-943. Producer or source: Austral Wright Metals.

1010, C10E, and C10R are wrought low-carbon (carbon = 0.07–0.13%) non-alloy steels that are used in the as rolled, annealed, normalized, or cold worked condition. These steels are characterized by low strength, high ductility, excellent cold formability, and excellent weldability. Within the carbon range of these steel grades, strength and hardness will increase with increase in carbon content and with cold work. Such increases in strength are at the sacrifice of ductility or the ability to withstand cold deformation. 1010, C10E, and C10R are widely used for lightly stressed parts where cold formability is the primary requisite. They are less expensive than 1008 and can be used when the requirements for cold forming are less exacting. 1010, C10E, and C10R may also be used in the case hardened, nitrided, or nitrocarburized condition. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on forming and heat treating. Filing Code: CS-265. Producer or source: Heat Treater's Guide.

Meehanite SFP500 is a ductile iron that has a minimum tensile strength of 500 MPa (73 ksi) and a minimum elongation of 8%, when measured on test pieces machined from separately cast samples. This Meehanite grade possesses a mixed matrix of ferrite and pearlite, with the ferrite predominating. It offers a compromise between the relatively soft, low tensile, high ductility ferritic types and the harder, higher tensile, lower ductility pearlitic grades. Meehanite SFP500 is a good all-round material providing a degree of toughness coupled with a higher tensile strength in the as-cast condition. This datasheet provides information on physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-108. Producer or source: Meehanite Metal Corporation.

1008 and C8C are wrought low-carbon (carbon ≤ 0.10%) non-alloy steels that are used in the as-rolled, annealed, normalized, or cold worked condition. These steels are characterized by low strength, high ductility, excellent cold formability, and excellent weldability. Within the carbon range of these steel grades, strength and hardness will increase with increase in carbon content and with cold work. Such increases in strength are at the sacrifice of ductility or the ability to withstand cold deformation. 1008 and C8C are widely used for lightly stressed parts where cold formability or drawability is the primary requirement. In general, they are not intended for heat treatment after cold working.1008 may, however, be used in the case hardened, nitrided, or nitrocarburized condition. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on forming and heat treating. Filing Code: CS-264. Producer or source: Heat Treater's Guide.

Aurubis CuFe0.1P is a low-alloyed, age hardened copper alloy. It combines very high electrical conductivity (≥ 84% IACS) and thermal conductivity with relatively high strength. The alloy has improved temperature resistance as well as good relaxation properties and is suited for welding and soldering. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance. Filing Code: Cu-942. Producer or source: Aurubis AG.

Meehanite SF450.15 is a ductile iron that has a minimum tensile strength of 450 MPa (65 ksi) and a minimum elongation of 15%, when measured on test pieces machined from separately cast samples. This Meehanite grade possesses a predominantly ferritic matrix giving the material a good level of ductility. It is used where a degree of shock resistance at ambient temperatures is important. Meehanite SF450.15 is of particular interest to design engineers wishing to replace fabrications or non-alloy steel castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-107. Producer or source: Meehanite Metal Corporation.

1021, 1022, C20C, and C20GC are wrought low-carbon (carbon = 0.18–0.23%) non-alloy steels that are used in the as rolled, normalized, cold worked, or quenched and tempered condition. They are widely used for lightly and moderately stressed parts that require higher strength levels than can be achieved by the lower carbon grades, and also for applications where a combination of low-to-moderate strength, good ductility, good cold formability, and good weldability are required. 1021 and 1022 may also be used in the case hardened, nitrided, or nitrocarburized condition. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on forming and heat treating. Filing Code: CS-263. Producer or source: Heat Treater's Guide.

Deutsche Edelstahlwerke Cryodur 2721 is a medium-carbon, nickel-chromium alloy cold-work tool steel. This oil hardening type cold work tool steel offers a combination of high hardness, good wear resistance, high toughness, and good machinability. This datasheet provides information on composition, physical properties, microstructure, hardness, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-839. Producer or source: Deutsche Edelstahlwerke Specialty Steel.

VDM 330 (Nicrofer 3718) is an austenitic iron-nickel-chromium-silicon alloy with good high-temperature strength and good resistance to carburization, thermal shock, and high temperature oxidation. It is used extensively in high-temperature environments where resistance to the combined effects of thermal cycling and carburization is required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1364. Producer or source: VDM Metals GmbH (a subsidiary of Acerinox, S.A.).