Böhler K107 is a high-carbon (2.1%), 12% chromium. 0.7 % tungsten, alloy cold-work tool steel that is used in applications where a very high abrasive wear resistance is needed, but where demands on chipping resistance are small. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-799. Producer or source: voestalpine Böhler Edelstahl GmbH&Co KG.

Deutsche Edelstahlwerke Cryodur 2080 is a high-carbon (2%), high-chromium (12%), alloy cold-work tool steel that is suitable for medium run tooling in applications where a very good abrasive wear resistance is needed but where demands on chipping resistance are small. This datasheet provides information on composition, hardness, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-792. Producer or source: Deutsche Edelstahlwerke Specialty Steel GmbH.

Industeel D2 is an air-hardening, high-carbon (1.5%), high-chromium (12%), alloy cold-work tool steel that also contains molybdenum and vanadium. It is specifically designed to provide high abrasive wear resistance and high hardenability. This grade can be used for cutting and deformation tools submitted to high abrasive wear. It can be used when Type D3 tool steel shows an excessive sensitivity to cracking or chipping. This datasheet provides information on composition, physical properties, hardness, and elasticity. Filing Code: TS-791. Producer or source: Industeel France (a subsidiary of ArcelorMittal.

Crucible Airdi 150 is an air-hardening, high-carbon (1.5%), high-chromium (12%), alloy cold work tool steel that also contains molybdenum and vanadium. It is suitable for applications that require very good abrasive wear resistance. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on machining and joining. Filing Code: TS-790. Producer or source: Crucible Industries LLC.

Finkl Steel Durodi is a nickel-chromium-molybdenum-vanadium, alloy hot work tool steel that hardens deeply and uniformly to a high hardness that holds up exceedingly well under impact and thermal shock. It is designed to provide maximum abrasion and heat resistance over a full range of service temperatures normally encountered in forging applications. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on high temperature performance as well as forming, machining, and joining. Filing Code: TS-789. Producer or source: Finkl Steel (a Schmolz + Bickenbach Group company).

Böhler K100 is a high-carbon, high-chromium (12%), alloy cold-work tool steel that is suitable for medium run tooling in applications where a very good abrasive wear resistance is needed but where demands on chipping resistance are small. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming and machining. Filing Code: TS-788. Producer or source: voestalpine Böhler Edelstahl GmbH & Co.

Kennametal Stellite 1 is a cobalt-chromium-tungsten-carbon hardfacing alloy that possesses excellent abrasion and corrosion resistance. It retains its hardness at temperatures in excess of 760 °C (1400 °F). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as machining. Filing Code: Co-128. Producer or source: Kennametal Inc.

YSS YXM4 is a cobalt-alloyed molybdenum high-speed tool steel with resistance to abrasion, seizure, and deformation under high pressure. This datasheet provides information on composition, physical properties, and hardness. It also includes information on high temperature performance. Filing Code: TS-780. Producer or source: Hitachi Metals America, Ltd.

High-speed tool steel with high-abrasion resistance and toughness for extended life. This datasheet provides information on composition, physical properties, hardness, and bend strength. It also includes information on heat treating. Filing Code: TS-762. Producer or source: Hitachi Metals America Ltd.

Sandvik APM 2730 is a powder metallurgical alloyed hot-isostatic-pressed high-speed tool steel with abrasive wear resistance and high-compressive strength. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on heat treating and machining. Filing Code: TS-763. Producer or source: Sandvik Steel Company.

Sandvik APM 2723 is a powder metallurgical alloyed hot-isostatic-pressed high-speed tool steel with abrasive wear resistance and high-compressive strength. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on heat treating. Filing Code: TS-758. Producer or source: Sandvik Steel Company.

YSS SLD-Magic is a cold work die steel with high abrasion resistance for extended life. This datasheet provides information on composition, physical properties, and hardness as well as fatigue. It also includes information on heat treating. Filing Code: TS-759. Producer or source: Hitachi Metals America Ltd.

YSS SLD is a cold work die steel with high abrasion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fatigue. It also includes information on heat treating. Filing Code: TS-756. Producer or source: Hitachi Metals America Ltd.

ABREX 500LT (hardness target of 500 HBW) is one of the Abrex series of abrasion resistant steel plate alloys. All of the products are maintained at very low impurity levels, making them well suited to welding and forming. The LT designation indicates an extra tough grade. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, machining, and joining. Filing Code: SA-770. Producer or source: Nippon Steel and Sumitomo Metal Corporation.

ABREX 450LT (hardness target of 450 HBW) is one of the Abrex series of abrasion resistant steel plate alloys. All of the products are maintained at very low impurity levels, making them well suited to welding and forming. The LT designation indicates an extra tough grade. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on surface qualities as well as forming, machining, and joining. Filing Code: SA-769. Producer or source: Nippon Steel and Sumitomo Metal Corporation.

ABREX 600 (hardness target of 600 HBW) is one of the Abrex series of abrasion resistant steel plate alloys. Abrex 600 is a standard option. All of the products are maintained at very low impurity levels, making them well suited to welding and forming. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on surface qualities as well as forming, machining, and joining. Filing Code: SA-765. Producer or source: Nippon Steel and Sumitomo Metal Corporation.

ABREX 500 (hardness target of 500 HBW) is one of the Abrex series of abrasion resistant steel plate alloys. All of the products are maintained at very low impurity levels, making them well suited to welding and forming. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on surface qualities as well as forming, machining, and joining. Filing Code: SA-762. Producer or source: Nippon Steel and Sumitomo Metal Corporation.

ABREX 450 (hardness target of 450 HBW) is one of the Abrex series of abrasion resistant steel plate alloys. All of the products are maintained at very low impurity levels, making them well suited to welding and forming. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on surface qualities as well as forming, machining, and joining. Filing Code: SA-761. Producer or source: Nippon Steel and Sumitomo Metal Corporation.

ABREX 400LT (hardness target of 400 HBW) is one of the Abrex series of abrasion resistant steel plate alloys. All of the products are maintained at very low impurity levels, making them well suited to welding and forming. The LT designation indicates an extra tough grade. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on surface qualities as well as forming, machining, and joining. Filing Code: SA-757. Producer or source: Nippon Steel and Sumitomo Metal Corporation.

XAR 400 (No. 1.8714) is a wear-resistant structural steel as heavy plate that is normalized or normalized rolled plate. XAR (extra abrasion resistant) steels are solutions for applications where wear is a key factor. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-704. Producer or source: ThyssenKrupp Steel Europe AG.