UGI 4313 (EN 10083-3 , No. 1.4313) is a martensitic stainless steel with low carbon for good impact strength and corrosion resistance. It has good mechanical properties and impact strength, and a corrosion resistance superior to that of conventional martensitic stainless steel grades with a high carbon content. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-1287. Producer or source: Schmolz + Bickenbach USA Inc..

Incoloy Alloy 945 is a nickel-base precipitation-strengthened alloy that provides 860 MPa (125 ksi) minimum yield strength and an excellent combination of ductility and impact strength. The nickel content is sufficient to provide protection against chloride-ion stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-666. Producer or source: Special Metals Corporation. Originally published December 2008, revised April 2014.

RUUKKI OPTIM 700 MC (700 MPa minimum yield strength) is a thermomechanically rolled (M), cold formable (C) steel that exceeds EN standards requirement (EN 10149-2). Optim 700 MC Plus offers high strength, excellent flange ability, excellent shearability and pierceability, and excellent impact strength in all directions. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: CS-178. Producer or source: Rautaruukki Corporation.

AMPCO 18.22 and 18.136 are variations of AMPCO 18 to produce a higher ultimate strength and to improve the impact resistance, respectively. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on casting. Filing Code: Cu-795. Producer or source: AMPCO Engineered Alloys.

Docol W steels are weather resistant during outdoor use. These steels are designated according to their lowest yield strength. In addition to its weather-resistance properties, Docol W steels are characterized by high resistance to impact and wear, good formability, and weldability. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming and joining. Filing Code: SA-616. Producer or source: SSAB Swedish Steel Inc.

Colmonoy 80PTA is a nickel-base hard surfacing composite powder for high impact and abrasion resistance in PTA applications. This datasheet provides information on composition, physical properties, microstructure, and hardness. It also includes information on powder metal forms. Filing Code: W-29. Producer or source: Wall Colmonoy Corporation.

Colmonoy 455L is a nickel-base hard-surfacing composite powder for high abrasion and moderate impact resistance. This datasheet provides information on composition, physical properties, and hardness. It also includes information on surface qualities as well as powder metal forms. Filing Code: Ni-670. Producer or source: Wall Colmonoy Corporation.

ATI 720 is a nickel-base alloy, solid solution strengthened with tungsten and molybdenum and precipitation hardened with titanium and aluminum. The alloy combines high strength with metallurgical stability as demonstrated by excellent impact strength retention after long exposures at elevated temperatures. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-669. Producer or source: Allvac, An Allegheny Technologies Company.

CARLSON ALLOY NITRONIC 60 is a galling- and wear-resistant austenitic stainless steel that provides a significantly lower-cost alternative to cobalt-bearing and high-nickel alloys. Corrosion resistance is superior to 304 in most media. Approximately twice the yield strength of 340 and 316. Possesses excellent high-temperature oxidation resistance and low-temperature impact resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion and wear resistance as well as forming. Filing Code: SS-1029. Producer or source: G.O. Carlson Inc.

BioDur 734 is a nitrogen-strengthened, austenitic stainless steel. The alloy exhibits improved tensile strength, impact strength, fatigue strength, and crevice and pitting corrosion resistance over standard Type 316L. The microstructural integrity and cleanness of this alloy are ensured through electroslag remelting (ESR). The alloy is nonmagnetic and is essentially free of ferrite. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: SS-915. Producer or source: Carpenter.

Sandvik SANBAR 61 is a high-strength silicon steel with good toughness and impact resistance in the as-rolled condition. The primary application is tapered rods. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on forming, heat treating, and machining. Filing Code: SA-502. Producer or source: Sandvik.

SHELLDIE is a hot-work steel in the low-carbon, high-chromium, high-molybdenum group that offers resistance to impact, abrasion, and heat effects. Typical applications include plastic molds and various dies. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: TS-554. Producer or source: A. Finkl & Sons Company.

NAK 55 is a very clean steel for use in plastic and rubber molds were impact resistance is not critical in design. Its age-hardening gives very high strength and good wear resistance. Tight tolerance are obtained with consistent expansion and contraction properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: SA-481. Producer or source: International Mold Steels.

THYSSEN P20 SUPER is a modified P20 with higher carbon and nickel to improve impact strength and temper resistance. This datasheet provides information on composition, physical properties, and hardness. It also includes information on heat treating, machining, and surface treatment. Filing Code: TS-523. Producer or source: Thyssen Specialty Steels Inc.

THYSSEN STRIPPER MATERIAL is ideally suited for a stripper material for plastic molding applications of all kinds. It is supplied preheat treated to Rc 38/42 (352-388 BHN), and has a high impact strength with good temper resistance. Hardness loss due to mass effects is very low. This datasheet provides information on composition and physical properties. It also includes information on heat treating, machining, joining, and surface treatment. Filing Code: SA-466. Producer or source: Thyssen Specialty Steels Inc.

THYROPLAST 2738 is an AISI P20 modified tool steel, electric arc melted and vacuum degassed ideally suited for large intricate dies and plastic molds. It has high hardenability with high abrasion resistance and impact strength. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating, machining, and joining. Filing Code: TS-518. Producer or source: Thyssen Specialty Steels Inc.

Thyroplast 2311 tool steel is an AISI P20 modified grade, electric are melted and vacuum degassed, applicable to large plastic molds. It has good abrasion resistance and high impact strength This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-514. Producer or source: Thyssen Specialty Steels Inc.. See also Alloy Digest TS-525, April 1994.

ZAMAK 3 is the most widely used general purpose zinc-base die casting alloy. It provides an excellent combination of strength and ductility. It has good impact strength. It is the designer's first choice for die casting applications. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Zn-1. Producer or source: Noranda Sales Corporation. Originally published December 1953, revised August 1966, revised September 1991.

CBS-1000M VIM-VAR is a carburizing bearing and gear steel designed for service up to 800 F(427 C). It is produced by vacuum induction melting followed by vacuum arc remelting to provide optimum strength, ductility, fatigue life and fracture toughness. The hardened case properties match those of M-50 VIM-VAR through-hardening bearing alloy while core properties provide good impact and crack propagation resistance. This datasheet provides information on composition, physical properties, elasticity, and shear strength. It also includes information on forming and heat treating. Filing Code: SA-450. Producer or source: Latrobe Steel Company.

ARMCO NITRONIC 60 Stainless Steel provides outstanding galling and wear resistance. It also has excellent high-temperature oxidation resistance and low-temperature impact resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-308. Producer or source: Baltimore Specialty Steels Corporation. Originally published as Nitronic 60, March 1975, revised July 1990.