CarTech L6 is an oil-hardening, high-carbon (0.70%), nickel-chromium, alloy cold-work tool steel. It is suitable for short run tooling in applications where a combination of high hardness and good toughness is required. The relatively high nickel content results in an alloy with greater impact toughness compared to the other common oil-hardening grades. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-800. Producer or source: Carpenter Technology Corporation.

Strenx™ 1100 Plus is a high-strength, hot-rolled, quenched and tempered, structural steel with a minimum yield strength of 1100 MPa (160 ksi) and very good weld performance. The strength, elongation, and impact toughness of weldments fulfill minimum guarantees of the base metal. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on machining and joining. Filing Code: SA-856. Producer or source: SSAB Swedish Steel, Inc..

UGI 4313 (EN 10083-3 , No. 1.4313) is a martensitic stainless steel with low carbon for good impact strength and corrosion resistance. It has good mechanical properties and impact strength, and a corrosion resistance superior to that of conventional martensitic stainless steel grades with a high carbon content. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-1287. Producer or source: Schmolz + Bickenbach USA Inc..

Incoloy Alloy 945 is a nickel-base precipitation-strengthened alloy that provides 860 MPa (125 ksi) minimum yield strength and an excellent combination of ductility and impact strength. The nickel content is sufficient to provide protection against chloride-ion stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-666. Producer or source: Special Metals Corporation. Originally published December 2008, revised April 2014.

RUUKKI OPTIM 700 MC (700 MPa minimum yield strength) is a thermomechanically rolled (M), cold formable (C) steel that exceeds EN standards requirement (EN 10149-2). Optim 700 MC Plus offers high strength, excellent flange ability, excellent shearability and pierceability, and excellent impact strength in all directions. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: CS-178. Producer or source: Rautaruukki Corporation.

LSS H12 is a general-purpose hot work tool steel with excellent impact toughness. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on wear resistance as well as heat treating and machining. Filing Code: TS-706. Producer or source: Latrobe Specialty Steel Company. See also Alloy Digest TS-686, January 2010.

RUUKKI RAEX 500 (typical yield strength 1250 MPa) is part of the Raex family of high-strength and wear-resistant steels with favorable hardness and impact toughness to extend life and decrease wear in structural components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on wear resistance as well as forming, machining, and joining. Filing Code: SA-658. Producer or source: Rautaruukki Corporation.

RUUKKI RAEX 400 (typical yield strength 1000 MPa) is part of the Raex family of high-strength and wear-resistant steels with favorable hardness and impact toughness to extend life and decrease wear in structural components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on wear resistance as well as forming, machining, and joining. Filing Code: SA-646. Producer or source: Rautaruukki Corporation.

RUUKKI RAEX 300 (typical yield strength 900 MPa) is part of the Raex family of high-strength and wear-resistant steels with favorable hardness and impact toughness to extend life and decrease wear in structural components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on wear resistance as well as forming, machining, and joining. Filing Code: SA-643. Producer or source: Rautaruukki Corporation.

AMPCO 18.22 and 18.136 are variations of AMPCO 18 to produce a higher ultimate strength and to improve the impact resistance, respectively. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on casting. Filing Code: Cu-795. Producer or source: AMPCO Engineered Alloys.

Docol W steels are weather resistant during outdoor use. These steels are designated according to their lowest yield strength. In addition to its weather-resistance properties, Docol W steels are characterized by high resistance to impact and wear, good formability, and weldability. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming and joining. Filing Code: SA-616. Producer or source: SSAB Swedish Steel Inc.

LSS H13 is a hot-work tool steel with excellent impact toughness. It is widely used in both hot-work and cold-work tooling applications. (See updated datasheet Alloy Digest TS-708, October 2012.) This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-688. Producer or source: Latrobe Specialty Steel Company.

LSS H12 is a hot-work tool steel with excellent impact toughness. It is used where resistance to cracking is needed. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on heat treating and machining. Filing Code: TS-686. Producer or source: Latrobe Specialty Steel Company. See also Alloy Digest TS-706, July 2012.

Colmonoy 80PTA is a nickel-base hard surfacing composite powder for high impact and abrasion resistance in PTA applications. This datasheet provides information on composition, physical properties, microstructure, and hardness. It also includes information on powder metal forms. Filing Code: W-29. Producer or source: Wall Colmonoy Corporation.

Colmonoy 455L is a nickel-base hard-surfacing composite powder for high abrasion and moderate impact resistance. This datasheet provides information on composition, physical properties, and hardness. It also includes information on surface qualities as well as powder metal forms. Filing Code: Ni-670. Producer or source: Wall Colmonoy Corporation.

ATI 720 is a nickel-base alloy, solid solution strengthened with tungsten and molybdenum and precipitation hardened with titanium and aluminum. The alloy combines high strength with metallurgical stability as demonstrated by excellent impact strength retention after long exposures at elevated temperatures. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-669. Producer or source: Allvac, An Allegheny Technologies Company.

LSS H11 is a hot-work tool steel with excellent impact toughness. It is used where resistance to cracking is needed. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on wear resistance as well as heat treating and machining. Filing Code: TS-677. Producer or source: Latrobe Specialty Steel Company.

CARLSON ALLOY NITRONIC 60 is a galling- and wear-resistant austenitic stainless steel that provides a significantly lower-cost alternative to cobalt-bearing and high-nickel alloys. Corrosion resistance is superior to 304 in most media. Approximately twice the yield strength of 340 and 316. Possesses excellent high-temperature oxidation resistance and low-temperature impact resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion and wear resistance as well as forming. Filing Code: SS-1029. Producer or source: G.O. Carlson Inc.

DuraTech Xtreme has very high impact toughness, high hot hardness, and good wear resistance. As indicated in the name, the alloy is intended for use in extreme” conditions. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on wear resistance as well as heat treating, machining, and powder metal forms. Filing Code: TS-663. Producer or source: Latrobe Specialty Steel Company.

Inco-Weld C-276 (ERNiCrMo-4) is a NiCrMo filler metal with increased molybdenum, tungsten, and reduced niobium and is suited to both gas metal arc welding (GMAW) or gas tungsten arc welding (GTAW) processes, either manually or fully automated. The alloy offers strength levels consistently exceeding the minimum requirement of the 9% Ni steels, excellent Charpy impact toughness at −196 deg C (−321 deg F), and improved wire delivery to the weld pool resulting from controlled filler metal processing. This datasheet provides information on composition and tensile properties. It also includes information on corrosion resistance as well as forming. Filing Code: Ni-657. Producer or source: Special Metals Welding Products Company.