Deutsche Edelstahlwerke Cryodur 2362 is a high-carbon, chromium-molybdenum-vanadium alloy cold-work tool steel with high tempering resistance. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fatigue. It also includes information on wear resistance as well as forming and heat treating. Filing Code: TS-840. Producer or source: Deutsche Edelstahlwerke Specialty Steel GmbH.

ACO Eurobar EN-GJS-400-18C-LT is a ferritic spheroidal graphite cast iron that is produced by the continuous casting process. It has a minimum tensile strength of 400 MPa (58 ksi) and a minimum elongation of 18%. It has a tensile strength exceeding that of the highest-tensile-strength grade of gray cast iron, together with much higher elongation and impact resistance. It is specifically designed to provide good impact properties at low temperature. This datasheet provides information on physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low temperature performance as well as casting, heat treating, and machining. Filing Code: CI-109. Producer or source: ACO Eurobar GmbH.

Atlas 316 is a chromium-nickel-molybdenum austenitic stainless steel, second only to Atlas 304 in commercial importance. The molybdenum gives Atlas 316 better overall corrosion resistant properties than type 304 austenitic stainless steel, particularly higher resistance to pitting and crevice corrosion in chloride environments. It is readily brake or roll formed, welded, soldered, and cut by both thermal and mechanical methods. The austenitic structure gives excellent toughness, even down to cryogenic temperatures. Atlas 316L, the low carbon version of Atlas 316, is highly resistant to sensitization (grain boundary carbide precipitation) and so is extensively used in heavy gauge welded components; about 5 mm, 0.2 in., and over. Atlas 316H, with its higher carbon content, has some application at elevated temperatures, as does stabilized type 316Ti. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-1365. Producer or source: Atlas Steels.

Austral Wright Alloy B25 (UNS C17200) is a wrought beryllium copper alloy. It provides the highest strength of any copper alloy, with electrical conductivity considerably greater than that of other high-strength copper alloys. Since it is heat treated after forming, it provides excellent formability and ductility. This alloy features good stress relaxation resistance and high fatigue strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Cu-943. Producer or source: Austral Wright Metals.

Meehanite SFP500 is a ductile iron that has a minimum tensile strength of 500 MPa (73 ksi) and a minimum elongation of 8%, when measured on test pieces machined from separately cast samples. This Meehanite grade possesses a mixed matrix of ferrite and pearlite, with the ferrite predominating. It offers a compromise between the relatively soft, low tensile, high ductility ferritic types and the harder, higher tensile, lower ductility pearlitic grades. Meehanite SFP500 is a good all-round material providing a degree of toughness coupled with a higher tensile strength in the as-cast condition. This datasheet provides information on physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-108. Producer or source: Meehanite Metal Corporation.

Aurubis CuFe0.1P is a low-alloyed, age hardened copper alloy. It combines very high electrical conductivity (≥ 84% IACS) and thermal conductivity with relatively high strength. The alloy has improved temperature resistance as well as good relaxation properties and is suited for welding and soldering. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance. Filing Code: Cu-942. Producer or source: Aurubis AG.

Meehanite SF450.15 is a ductile iron that has a minimum tensile strength of 450 MPa (65 ksi) and a minimum elongation of 15%, when measured on test pieces machined from separately cast samples. This Meehanite grade possesses a predominantly ferritic matrix giving the material a good level of ductility. It is used where a degree of shock resistance at ambient temperatures is important. Meehanite SF450.15 is of particular interest to design engineers wishing to replace fabrications or non-alloy steel castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-107. Producer or source: Meehanite Metal Corporation.

Deutsche Edelstahlwerke Cryodur 2721 is a medium-carbon, nickel-chromium alloy cold-work tool steel. This oil hardening type cold work tool steel offers a combination of high hardness, good wear resistance, high toughness, and good machinability. This datasheet provides information on composition, physical properties, microstructure, hardness, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-839. Producer or source: Deutsche Edelstahlwerke Specialty Steel.

VDM 330 (Nicrofer 3718) is an austenitic iron-nickel-chromium-silicon alloy with good high-temperature strength and good resistance to carburization, thermal shock, and high temperature oxidation. It is used extensively in high-temperature environments where resistance to the combined effects of thermal cycling and carburization is required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1364. Producer or source: VDM Metals GmbH (a subsidiary of Acerinox, S.A.).

Atlas 310 / 310S / 310H are chromium-nickel austenitic stainless steels. They combine excellent high temperature properties with good ductility and weldability. Atlas 310S (UNS S31008) is used when the application environment involves moist corrodents in a temperature range lower than that which is normally considered "high temperature" service. The lower carbon content of 310S does reduce its high temperature strength as compared to that of 310H. Atlas 310H (UNS S31009) has a carbon content restricted to exclude the lower end of the Atlas 310 range. It is the grade of choice for high temperature applications. Grade 310L encompasses a series of proprietary grades, generally with a 0.03% maximum carbon and sometimes used for very specific corrosive environments such as urea production. Like other austenitic grades the 310 family has excellent toughness, even down to cryogenic temperatures, although other grades are normally used in sub-zero environments. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as heat treating and joining. Filing Code: SS-1363. Producer or source: Atlas Steels.

Atlas 304 is the standard “18/8” austenitic stainless. It is the most versatile and most widely used stainless steel and is available in the widest range of product forms and finishes. It has excellent forming and welding characteristics. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1362. Producer or source: Atlas Steels.

VDM 33 (Nicrofer 3033) is an austenitic alloy that has an excellent resistance against common corrosion and pitting corrosion in media containing chloride due to its well-balanced analysis and extraordinarily high chromium content. Also because of its very high strength and good workability, VDM 33 is a material that can be used for many applications in the chemical processing industry. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-786. Producer or source: VDM Metals GmbH (a subsidiary of Acerinox, S.A.).

Aurubis CuSn0.15 is a tin bearing copper that combines medium strength with good electrical and thermal conductivity. Moreover, the alloy exhibits an increased temperature stability as compared to the highest conductive copper alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming and joining. Filing Code: Cu-941. Producer or source: Aurubis AG.

Meehanite SF420.12 is a ductile iron that has a minimum tensile strength of 420 MPa (61 ksi) and a minimum elongation of 12%, when measured on test pieces machined from separately cast samples. This Meehanite grade possesses a predominantly ferritic matrix giving the material a good level of ductility. It is used where a degree of shock resistance at ambient temperatures is important. Meehanite SF420.12 is of particular interest to design engineers wishing to replace fabrications or malleable iron castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-106. Producer or source: Meehanite Metal Corporation.

Böhler K302 Isodisc is a chromium-molybdenum-vanadium alloy hot-work tool steel. It is characterized by good toughness, high hot hardness, and high wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as heat treating. Filing Code: TS-837. Producer or source: voestalpine Böhler Edelstahl GmbH & Co KG.

Böhler L306 VMR is a wrought, age-hardenable nickel-chromium alloy, strengthened by additions of titanium, aluminum, and carbon. It has been developed as a creep-resisting alloy for service at temperatures up to 815 °C (1500 °F). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming and heat treating. Filing Code: Ni-785. Producer or source: voestalpine Böhler Edelstahl GmbH & Co KG.

Raffmetal EN AB-Al Si10Mg(Fe) (EN AB-43400) is an aluminum-silicon-magnesium casting alloy in ingot form for remelting. It is used extensively for producing high pressure die castings and low pressure die castings for applications requiring a combination of excellent casting characteristics, good strength with fair ductility, and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting and heat treating. Filing Code: Al-501. Producer or source: Raffmetal S.p.A.

Böhler L090 is a wrought, precipitation-hardenable, nickel-chromium-cobalt alloy that is strengthened by additions of titanium and aluminum. It has been developed as an age-hardenable creep resisting alloy for service at temperatures up to 900 °C (1650 °F). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming and heat treating. Filing Code: Ni-784. Producer or source: voestalpine Böhler Edelstahl GmbH & Co KG.

Böhler K300 Isodisc is a chromium-molybdenum-vanadium alloy hot-work tool steel. It is characterized by outstanding air hardenability, excellent hot tensile properties, high impact strength, and good polishability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating. Filing Code: TS-836. Producer or source: voestalpine Böhler Edelstahl GmbH & Co KG.

Raffmetal EN AB-Al Si9Mg (EN AB-43300) is a heat-treatable, aluminum-silicon-magnesium casting alloy in ingot form for remelting. It is used extensively for producing sand and permanent mold castings for applications requiring a combination of excellent casting characteristics, high strength with excellent ductility, and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Al-500. Producer or source: Raffmetal S.p.A.