Meehanite SFP500 is a ductile iron that has a minimum tensile strength of 500 MPa (73 ksi) and a minimum elongation of 8%, when measured on test pieces machined from separately cast samples. This Meehanite grade possesses a mixed matrix of ferrite and pearlite, with the ferrite predominating. It offers a compromise between the relatively soft, low tensile, high ductility ferritic types and the harder, higher tensile, lower ductility pearlitic grades. Meehanite SFP500 is a good all-round material providing a degree of toughness coupled with a higher tensile strength in the as-cast condition. This datasheet provides information on physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-108. Producer or source: Meehanite Metal Corporation.

Meehanite SF450.15 is a ductile iron that has a minimum tensile strength of 450 MPa (65 ksi) and a minimum elongation of 15%, when measured on test pieces machined from separately cast samples. This Meehanite grade possesses a predominantly ferritic matrix giving the material a good level of ductility. It is used where a degree of shock resistance at ambient temperatures is important. Meehanite SF450.15 is of particular interest to design engineers wishing to replace fabrications or non-alloy steel castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-107. Producer or source: Meehanite Metal Corporation.

Meehanite SF420.12 is a ductile iron that has a minimum tensile strength of 420 MPa (61 ksi) and a minimum elongation of 12%, when measured on test pieces machined from separately cast samples. This Meehanite grade possesses a predominantly ferritic matrix giving the material a good level of ductility. It is used where a degree of shock resistance at ambient temperatures is important. Meehanite SF420.12 is of particular interest to design engineers wishing to replace fabrications or malleable iron castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-106. Producer or source: Meehanite Metal Corporation.

ATI 301 (UNS S30100) is an austenitic stainless steel with a nominal composition of 17 percent chromium and 7 percent nickel. The high strength of this grade of steel in the six available conditions or tempers, its resistance to atmosphere corrosion, and its bright, attractive surface make it an excellent choice for decorative structural applications. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive strength as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming and heat treating. Filing Code: SS-1359. Producer or source: ATI.

Uddeholm Corrax for AM is a stainless steel developed for additive manufacturing. Its unique set of properties makes it a choice for tools where superior corrosion resistance combined with high hardness is needed. These properties make it suitable for tools for plastic molds, including for demanding applications such as molds for medical parts, parts made of corrosive plastics, and parts made of rubber. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as forming, heat treating, surface treatment, and powder metal forms. Filing Code: SS-1358. Producer or source: Uddeholms AB.

Meehanite GB300 is a pearlitic gray cast iron that has a minimum tensile strength of 300 MPa (44 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. This grade exhibits high strength while still maintaining good thermal conductivity and good machinability. It is generally used for applications where the thermal conductivity requirements preclude the use of other higher-strength materials, such as spheroidal graphite cast irons, which have inferior thermal properties. This datasheet provides information on physical properties, hardness, tensile properties, and compressive strength as well as fatigue. It also includes information on low and high temperature performance as well as heat treating, machining, and joining. Filing Code: CI-75. Producer or source: Meehanite Metal Corporation.

Dura-Bar 100-70-03 is a pearlitic ductile iron that is used for continuous cast products. It has the best wear resistance of the ascast ductile irons and is used in applications requiring high strength and high wear resistance. This grade is normally used as an alternative to quenched and tempered steels that have hardness values less than 302 HBW. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive strength. It also includes information on heat treating and machining. Filing Code: CI-74. Producer or source: Charter Dura-Bar, Inc.

ISO 185/JL/225 is an intermediate-tensile-strength gray cast iron that has a predominantly pearlitic matrix, and a tensile strength of 225–325 MPa (33-47 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, ISO 185/JL/225 contains lower carbon and silicon contents, while still maintaining excellent thermal conductivity, damping capacity, and machinability. This datasheet provides information on composition, physical properties, tensile properties, and compressive strength as well as fatigue. It also includes information on heat treating. Filing Code: CI-73. Producer or source: International Organization for Standardization (ISO).

Uddeholm Sverker 3 is a high-carbon, chromium-tungsten, alloy cold-work tool steel. It is suitable for medium and long run tooling in applications where a very good abrasive wear resistance is needed. Uddeholm Sverker 3 contains large carbides, which are advantageous for abrasive wear resistance but which reduce chipping resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength. It also includes information on heat treating. Filing Code: TS-797. Producer or Source: Uddeholms AB.

Industeel Tenasteel is a high-carbon, chromium-molybdenum-vanadium, alloy cold-work tool steel that is specially designed to replace Type D2 and X153CrMoV12 (1.2379) cold work tool steels in applications requiring high wear resistance and very good toughness. This datasheet provides information on composition, physical properties, elasticity, and compressive strength. It also includes information on heat treating. Filing Code: TS-795. Producer or source: Industeel France (a subsidiary of ArcelorMittal).

ISO 185/JL/200 is an intermediate-tensile-strength gray cast iron that has a predominantly pearlitic matrix, and a tensile strength of 200–300 MPa (29–44 ksi) when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, 185/JL/200 contains lower carbon and silicon contents, while still maintaining excellent thermal conductivity, damping capacity, and machinability. This datasheet provides information on composition, physical properties, tensile properties, compressive and bend strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-70. Producer or source: International Organization for Standardization.

Dura-Bar 65-45-12 is a ductile iron that is used for continuous cast products. Its microstructure consists of nodular graphite in a matrix of ferrite with small amounts of pearlite. Dura-Bar 65-45-12 is used for moderately stressed parts requiring good ductility and machinability. This datasheet provides information on composition, physical properties, tensile properties, compressive and shear strength. It also includes information on heat treating and machining. Filing Code: CI-69. Producer or source: Charter Dura-Bar, Inc.

Wieland-UB5 is complex aluminum bronze that has excellent machinability, high hardness, and high compressive strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength. It also includes information on high temperature performance, corrosion and wear resistance as well as forming, heat treating, and machining. Filing Code: Cu-888. Producer or source: Wieland Metals, Inc.. Originally published May 2019, corrected December 2019.

Sandvik APM 2730 is a powder metallurgical alloyed hot-isostatic-pressed high-speed tool steel with abrasive wear resistance and high-compressive strength. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on heat treating and machining. Filing Code: TS-763. Producer or source: Sandvik Steel Company.

Sandvik APM 2723 is a powder metallurgical alloyed hot-isostatic-pressed high-speed tool steel with abrasive wear resistance and high-compressive strength. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on heat treating. Filing Code: TS-758. Producer or source: Sandvik Steel Company.

Böhler (or Boehler) S590 is a high-speed steel with high-wear resistance, high-compressive strength, very good through-hardening properties, good toughness, good dimensional stability on heat treat, and very good temper resistance. This datasheet provides information on composition, physical properties, and hardness. It also includes information on wear resistance as well as forming, heat treating, machining, and powder metal forms. Filing Code: TS-752. Producer or source: Voestalpine High Performance Metals Corporation.

Ferro-Titanit S is one of a series of metal-matrix composites manufactured by a powder metallurgy process and is a range of carbide-alloyed materials. This datasheet provides information on composition, physical properties, hardness, and compressive, shear, bearing, and bend strength. It also includes information on as well as heat treating and machining. Filing Code: SS-1290. Producer or source: Deutsche Edelstahlwerke GmbH.

Ferro-Titanit Nikro 143 is one of a series of metal-matrix composites manufactured by a powder metallurgy process and is a range of carbide-alloyed materials from Deutsche Edelstahlwerke. The Nikro 143 grade is an iron-base alloy containing 30 wt.% titanium carbide. Because of its high wear resistance and low tendency toward cold welding, Ferro-Titanit is particularly used in forming and cutting tools, hydraulic jacks for polymer production, and pelletizing and granulating cutter blades. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive, shear, and bend strength as well as fracture toughness. It also includes information on heat treating. Filing Code: Fe-168. Producer or source: Deutsche Edelstahlwerke GmbH.

Wieland-G07 is a cast high leaded tin bronze subject to medium stress in slide bearing applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on low temperature performance as well as heat treating and joining. Filing Code: Cu-869. Producer or source: Wieland Metals Inc..

Ancorbraze 72 is a sinterbraze material to join ferrous PM parts to each other or ferrous PM parts to wrought substrates. This datasheet provides information on composition, physical properties, and compressive strength. It also includes information on powder metal forms. Filing Code: Ni-741. Producer or source: Hoeganaes Corporation.