Aurubis CuFe0.1P is a low-alloyed, age hardened copper alloy. It combines very high electrical conductivity (≥ 84% IACS) and thermal conductivity with relatively high strength. The alloy has improved temperature resistance as well as good relaxation properties and is suited for welding and soldering. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance. Filing Code: Cu-942. Producer or source: Aurubis AG.

Aurubis CuSn0.15 is a tin bearing copper that combines medium strength with good electrical and thermal conductivity. Moreover, the alloy exhibits an increased temperature stability as compared to the highest conductive copper alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming and joining. Filing Code: Cu-941. Producer or source: Aurubis AG.

Aurubis CuZn0.5 is a copper alloy deoxidized by the addition of zinc. It has good electrical conductivity (≥ 82% IACS), and higher strength as compared to pure copper. This alloy has very good welding and soldering properties because it is largely insensitive to hydrogen embrittlement. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming and joining. Filing Code: Cu-938. Producer or source: Aurubis AG.

Meehanite SF400 is a ferritic ductile iron that has a minimum tensile strength of 400 MPa (58 ksi) and a minimum elongation of 17%, when measured on test pieces machined from separately cast samples. This fully ferritic Meehanite grade is produced by either strict control of the raw materials during melting or by an annealing heat treatment to eliminate any pearlite formed during solidification. Meehanite SF400 is specifically designed for general engineering applications where high ductility and exceptional resistance to impact is required. It also provides maximum toughness at ambient temperatures. Compared with cast steel of similar strength, it is possible to reduce machining times by up to 25%. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fatigue. It also includes information on casting, heat treating, and machining. Filing Code: CI-98. Producer or source: Meehanite Metal Corporation.

CEN EN-GJL-200 is an intermediate-tensile-strength gray cast iron that has a predominantly pearlitic matrix, and a tensile strength of 200–300 MPa (29–44 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, CEN EN-GJL-200 contains lower carbon and silicon contents and exhibits superior wear properties, while still maintaining good thermal conductivity, good damping capacity, and good machinability. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on casting, heat treating, and machining. Filing Code: CI-96. Producer or source: European Committee for Standardization (CEN).

SSAB Ramor 400 is a low-carbon, chromium-molybdenum-nickel-boron alloy protection steel that is used in the heat treated condition (Hardness = 360–460 HBW) for blast protection. This datasheet provides information on composition, hardness, tensile properties, and bend strength. It also includes information on forming, machining, and joining. Filing Code: SA-876. Producer or source: SSAB AB.

SSAB Ramor 500 is a nickel-chromium-molybdenum-boron, alloy protection steel that is used in the quenched condition (hardness = 490–560 HBW) for ballistic protection. This datasheet provides information on composition, hardness, tensile properties, and bend strength. It also includes information on forming, heat treating, and joining. Filing Code: SA-875. Producer or source: SSAB AB.

KME Cu-DHP is a phosphorus-deoxidized copper that contains a minimum of 99.90% copper and high residual phosphorus. The electrical conductivity of this type of copper is relatively low on account of the high phosphorus content. KME Cu-DHP possesses very good formability and joining properties and is resistant against hydrogen embrittlement. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-923. Producer or source: KME Germany GmbH.

ISO 185/JL/275 is an intermediate-tensile-strength gray cast iron that has a pearlitic matrix and a tensile strength of 275–375 MPa (40–54 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, ISO 185/JL/275 contains lower carbon and silicon contents, while still maintaining good thermal conductivity and damping capacity. Owing to its higher tensile strength and hardness, it exhibits superior wear properties. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-79. Producer or source: International Organization for Standardization.

Industeel Mars 380 (earlier known as Industeel Mars 190) is a low-carbon, Ni-Cr-Mo-V-B, alloy protection steel that is used in the quenched and tempered condition (typical hardness = 380 HBW). It is used as rolled homogeneous armor for ballistic protection and evaluation of armor-defeating ammunition. This datasheet provides information on composition, hardness, and bend strength. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-869. Producer or source: Industeel France.

ATI CP Grade 7 Titanium is an unalloyed titanium grade that contains 0.12–0.25% Pd. This palladium-containing alloy extends the range of application of commercially pure (CP) titanium in HCl, H3PO4, and H2SO4 solutions. ATI CP Grade 7 Titanium is used in applications requiring excellent corrosion resistance in chemical processing or storage applications where the media is mildly reducing or fluctuates between oxidizing and reducing. It can be used in continuous service up to 425 °C (795 °F) and in intermittent service up to 540 °C (1000 °F). This datasheet provides information on composition, physical properties, elasticity, tensile properties and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ti-175. Producer or source: ATI.

Atlas 5052 is a wrought, non-heat-treatable, Al-2.5Mg-0.25Cr alloy (5xxx series) that offers an attractive combination of moderate strength, good formability and weldability, and excellent corrosion resistance particularly in marine atmospheres. It is also very easy to anodize, providing a pleasant matte finish. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Al-470. Producer or source: Atlas Steels.

KME Cu-ETP (electrolytic tough pitch copper) is an electrolytically refined, high conductivity copper that contains a minimum of 99.90% Cu and a controlled amount of oxygen in the form of Cu2O. It has a minimum electrical conductivity of 100% IACS. Cu-ETP is the most widely used grade of copper in electrical applications all over the world and represents over half of global copper use. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fatigue. It also includes information on heat treating. Filing Code: Cu-913. Producer or source: KME Germany GmbH.

Atlas 5083 is a non-heat-treatable, Al-4.5Mg-0.7Mn-0.15Cr alloy that is known for exceptional performance in extreme environments. It is highly resistant to attack by both seawater and industrial chemicals. Atlas 5083 has the highest strength of the non-heat-treatable alloys but is not recommended for use at temperatures in excess of 65 °C (150 °F). It retains exceptional strength after welding. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-468. Producer or source: Atlas Steels.

Aurubis Cu-OF is an oxygen-free, high conductivity copper with 99.95% minimum Cu. It offers the advantages of both electrolytic tough pitch (ETP) copper and phosphorus deoxidized (DHP) copper. Its high purity, with less than 10 ppm (0.001%) oxygen, and the absence of deoxidizers accounts for an electrical conductivity of 100% IACS minimum, as well as no susceptibility to hydrogen embrittlement. Due to the absence of oxides in the structure, Cu-OF is capable of withstanding extra deep drawing and severe forming, and is superior to Cu-ETP in this respect. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Cu-911. Producer or Source: Aurubis AG.

ISO 185/JL/200 is an intermediate-tensile-strength gray cast iron that has a predominantly pearlitic matrix, and a tensile strength of 200–300 MPa (29–44 ksi) when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, 185/JL/200 contains lower carbon and silicon contents, while still maintaining excellent thermal conductivity, damping capacity, and machinability. This datasheet provides information on composition, physical properties, tensile properties, compressive and bend strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-70. Producer or source: International Organization for Standardization.

ISO 185/JL/150 is an unalloyed low-tensile-strength gray cast iron that has high carbon and silicon contents, and thus the highest thermal conductivity and damping capacity. It is, therefore, useful in situations where high thermal conductivity, damping capacity, and machinability are important, but where tensile strength and hardness are not the crucial properties in service. The high carbon content of this material also imparts good lubricated bearing properties. This datasheet provides information on composition, physical properties, tensile properties, shear and bend strength as well as fatigue. It also includes information on casting, heat treating, and machining. Filing Code: CI-67. Producer or source: International Organization for Standardization.

Wieland-K73 (UNS C19005) is copper alloyed with low nickel for good fabricability for parts in the electrical industry. This datasheet provides information on composition, physical properties, and bend strength as well as fatigue. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: Cu-901. Producer or source: Wieland Metals, Inc..

YSS YXR7 is a high-speed tool steel with good toughness and wear resistance. It is used for blanking dies, forging dies, heading dies, and thread forming dies. This datasheet provides information on composition, physical properties, hardness, and bend strength. It also includes information on heat treating. Filing Code: TS-783. Producer or source: Hitachi Metals America, Ltd.

Strenx™ 1100 Plus is a high-strength, hot-rolled, quenched and tempered, structural steel with a minimum yield strength of 1100 MPa (160 ksi) and very good weld performance. The strength, elongation, and impact toughness of weldments fulfill minimum guarantees of the base metal. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on machining and joining. Filing Code: SA-856. Producer or source: SSAB Swedish Steel, Inc..