YSS YXM4 is a cobalt-alloyed molybdenum high-speed tool steel with resistance to abrasion, seizure, and deformation under high pressure. This datasheet provides information on composition, physical properties, and hardness. It also includes information on high temperature performance. Filing Code: TS-780. Producer or source: Hitachi Metals America, Ltd.

MITTAL DI-FORM 140T and HB T965 are low carbon steels with dual phase manganese and silicon composition. Dual-phase (DP) steel microstructures typically consist of a soft ferrite phase with dispersed islands of a hard martensite phase. The martensite phase is substantially stronger than the ferrite phase. The dual-phase grades, including those with high tensile strengths of 965 MPa (140 ksi), that are designed for forming (DI-FORM), also have low yield-strength-to-tensile-strength ratios to improve formability. This datasheet provides information on microstructure and tensile properties as well as deformation and fatigue. It also includes information on forming and surface treatment. Filing Code: SA-566. Producer or source: Mittal Steel USA Flat Products.

AK Steel 409 Ultra Form was created for applications needing oxidation or corrosion protection beyond the capability of carbon steel and some coated steels. AK Steel 409 Ultra Form is more formable than standard Type 409 stainless steel and is particularly suitable for parts requiring more complex shapes and improved weldability. Examples of applications include automotive exhaust tubing and stampings. This datasheet provides information on physical properties, hardness, elasticity, and tensile properties as well as deformation. It also includes information on high temperature performance as well as forming and joining. Filing Code: SS-990. Producer or source: AK Steel, Butler Operations.

MITTAL DI-FORM T700 and HF80Y100T are low-carbon steels with a manganese and silicon composition. Dual-phase (DP) steels are one of the important advanced high-strength steel (AHSS) products developed for the automotive industry. Their microstructure typically consists of a soft ferrite phase with dispersed islands of a hard martensite phase. The martensite phase is substantially stronger than the ferrite phase. The DI-FORM grades exhibit low yield-to-tensile strengths, and the numeric designation in the name corresponds to the tensile strength. This datasheet provides information on microstructure and tensile properties as well as deformation and fatigue. It also includes information on forming. Filing Code: SA-561. Producer or source: Mittal Steel USA Flat Products.

MITTAL HI FORM HF 70Y80T is a dual-phase steel with 550 MPa tensile strength used for automotive body structures. The dual-phase steel microstructure typically consists of a soft ferrite phase with dispersed islands of a hard martensite phase. The martensite phase is substantially stronger than the ferrite phase. The dual-phase 550 MPa grades are high yield strength to tensile strength ratio alloys for improved structural behavior. This datasheet provides information on tensile properties as well as deformation. It also includes information on forming. Filing Code: SA-557. Producer or source: Mittal Steel USA Flat Products.

Mittal Di-Form T500 is a dual-phase steel intended primarily for exposed outer automotive body panels (door, hoods, and fenders). Dual-phase steels are one of the important advanced high-strength steel products developed for the automotive industry. Their microstructure typically consists of a soft ferrite phase with dispersed islands of a hard martensite phase. The martensite phase is substantially stronger than the ferrite phase. The Di-Form grades exhibit low yield-to-tensile strength ratios and the name corresponds to the tensile strength. This datasheet provides information on tensile properties as well as deformation and fatigue. It also includes information on forming and joining. Filing Code: SA-556. Producer or source: Mittal Steel USA Flat Products.

AK Steel 441 has good high-temperature strength, an equiaxed microstructure, and good high-temperature oxidation resistance. The alloy is a niobium-bearing ferritic stainless steel. This datasheet provides information on composition, hardness, and tensile properties as well as deformation. It also includes information on high temperature performance and corrosion resistance as well as forming and joining. Filing Code: SS-965. Producer or source: AK Steel.

AK Steel 18 Cr-Cb HF has an equiaxed microstructure, good high-temperature strength, and good high-temperature oxidation resistance. The alloy was designed to provide improved formability, particularly in multiple forming operations, due in part to a finer final annealed grain structure. This datasheet provides information on composition, hardness, and tensile properties as well as deformation. It also includes information on high temperature performance and corrosion resistance as well as forming and joining. Filing Code: SS-960. Producer or source: AK Steel.

Incotherm TD is a thermocouple-sheathing alloy with elements of silicon and rare earths to enhance oxidation resistance at high temperatures. This datasheet provides information on composition, physical properties, and tensile properties as well as deformation. It also includes information on high temperature performance and corrosion resistance as well as forming. Filing Code: Ni-628. Producer or source: Special Metals Corporation.

Durehete 950 is a high-strength steel bolting material often used in steam turbine and other power plant applications. It is usually supplied in the heat treated condition. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness, creep, and deformation. It also includes information on high temperature performance as well as forming and heat treating. Filing Code: SA-145. Producer or source: Corus Products USA. Originally published May 1963, revised October 2005.

MoldStar 18 has good bearing qualities and has resistance to wear, abrasion, fatigue, deformation, and corrosion. MoldStar 21 and 22 are harder alloys and also have good bearing qualities and resistance to wear, abrasion, fatigue, deformation, and corrosion. This family of aluminum bronzes is used as wear plates, sleeve bearings, and guide pin bushings. MoldStar 18 is also known as PAS 18. This datasheet provides information on physical properties, hardness, elasticity, tensile properties, and compressive strength. Filing Code: CU-733. Producer or source: Performance Alloys.

TMAX520J2B is carburizing steel with cold formability for ease in production. This datasheet provides information on composition and hardness as well as fracture toughness, deformation, and fatigue. It also includes information on heat treating. Filing Code: SA-543. Producer or source: Sanyo Special Steel Company Ltd.

DUAL-TEN 600 is a dual-phase steel for the automotive industry. Dual-phase steels are most commonly used in structural applications where they have replaced more conventional high-strength low-alloy (HSLA) steels. Applications include front and rear rails, crush cans, rocker reinforcements, pillar reinforcements, inner and outer cowl, back panels, cross members, bumpers, and door intrusion beams. This datasheet provides information on composition, physical properties, microstructure, tensile properties, and bend strength as well as deformation. It also includes information on forming and joining. Filing Code: SA-533. Producer or source: United States Steel.

Wieland-M30 has excellent cold working properties and good strength. The alloy is used in decorative products. It is commonly called cartridge brass, spinning brass, or extra-quality brass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as deformation. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: CU-713. Producer or source: Wieland Metals Inc., Wieland-Werke AG.

Brush Alloy 390 was specifically designed for high-power applications and provides a combination of high strength and high conductivity. Increasing power requirements drive the need for lower conductor resistance to reduce joule heating. This alloy has a high thermal conductivity that is critical to thermal management. Higher power requirements create harsh environments and higher operating temperatures. Alloy 390 provides excellent stress-relaxation resistance at elevated temperatures, which increases electrical contact reliability. This datasheet provides information on composition, physical properties, and elasticity as well as fracture toughness, deformation, and fatigue. It also includes information on high temperature performance. Filing Code: CU-712. Producer or source: Brush Wellman Inc.

DUAL-TEN 500 (UTS 500 MPa, or 73 ksi) is a dual-phase steel for the automotive industry. Dual-phase steels are most commonly used in structural applications where they have replaced more conventional HSLA steels. They offer a great opportunity for part weight reduction. The improved formability, capacity to absorb crash energy, and ability to resist fatigue have driven this substitution. Applications include front and rear rails, crush cans, rocker reinforcements, pillar reinforcements, inner and outer cowl, back panels, cross members, bumpers, and door intrusion beams. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as deformation. It also includes information on forming and joining. Filing Code: SA-530. Producer or source: United States Steel.

DuraFoil-Clad is a laminate composite form of DuraFoil (see Alloy Digest SS-892, November 2003), a heat-resistant ferritic stainless steel with excellent oxidation resistance for high-temperature applications. The material is a metallurgically bonded Al/Fe-Cr stainless steel/Al metallic composite. The material should be converted to a uniform solid-solution alloy (the single alloy form DuraFoil) by diffusion alloying before service in high-temperature applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as deformation. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-897. Producer or source: Engineered Materials Solutions Inc.

Outokumpu 7026 (C 7026) is a high-strength age-hardenable CuNiSi alloy for demanding signal and power applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as deformation. It also includes information on forming. Filing Code: CU-710. Producer or source: Outokumpu American Brass Inc.

Carpenter Project 70+ 15Cr-5Ni is a modified version of Type 15Cr-5Ni stainless steel with improved machinability. The material meets all aspects of the aerospace specification AMS 5659. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties as well as fracture toughness, and deformation. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-889. Producer or source: Carpenter Specialty Alloys.

Wieland-B16 has excellent strength and cold-working properties. It is largely used in connectors. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as deformation and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CU-704. Producer or source: Wieland Metals Inc., Wieland-Werke AG.