ULTRA 76 TANTALUM alloys have been used in various process industry applications requiring resistance to aggressive, hazardous chemicals. These tantalum alloys provide cost-effective, long service-life for critical components in severe (corrosive) environments. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as heat treating. Filing Code: TA-13. Producer or source: H.C. Starck Inc.

KBI-10 alloy is a high-strength tantalum-tungsten alloy. It has excellent strength at high temperatures. This gives it serviceability as an aerospace material. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ta-12. Producer or source: Cabot Corporation.

Tantalum finds its largest use in the electronics industry, where it is used in filaments, filament supports, and capacitors. Metallurgical grade tantalum is used extensively in chemical process equipment. Tantalum resists corrosion by body fluids and is used in prosthetic devices. Its high melting point gives it utility in vacuum furnace components. It is also used as an alloying element in superalloys. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ta-11. Producer or source: Cabot Corporation.

TANTALUM is a high-density, ductile metal with excellent resistance to corrosion. Two grades of Tantalum, EB (electron beam melted) and PM (powder metallurgy) are covered. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ta-10. Producer or source: Fansteel Metallurgical Corporation. See also Alloy Digest Ta-2, November 1972.

TANTALOY 60 Metal is a vacuum-melted, solid-solution alloy of tantalum and tungsten. It retains useful strength up to 4500 F. Its corrosion resistance is similar to unalloyed tantalum and it is only slightly more difficult to fabricate. If high-temperature exposure is under conditions other than vacuum or inert atmosphere, coating protection may be required. The alloy is used in highly specialized and sophisticated aerospace system applications and in special chemical process. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ta-9. Producer or source: Fansteel Metallurgical Corporation.

KBI-6 is a tantalum-base alloy with added tungsten for strengthening. It is used in the chemical process industry. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ta-8. Producer or source: Cabot Corporation.

TANTALOY 61 METAL is a tantalum-tungsten alloy of high density. It was developed for use as a spring material or for other elastic parts which must operate under chlorinating or severe acid conditions. Its combination of mechanical and anti-corrosion properties has led to extensive use for chlorinator valve springs. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ta-6. Producer or source: Fansteel Metallurgical Corporation.

TANTALOY 63 Metal is a tantalum-base alloy containing typically 2.5% tungsten and 0.15% columbium. It is melted in an electron-beam furance. Its strength is considerably greater than that of unalloyed tantalum. For a wide range of chemicals at elevated temperatures, its corrosion resistance is comparable to or better than that of pure tantalum. Typical appalications are heaters, condensers and multi-tube heat exchangers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ta-5. Producer or source: Fansteel Metallurgical Corporation.

WC-222 Alloy is a tantalum-base alloy developed for applications involving exposure to loads at very high temperatures. It is available in most commercial forms. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ta-4. Producer or source: Wah Chang, a Teledyne Corporation.

FANSTEEL 61 METAL is a high-density, high-strength alloy developed for use as a spring material or for other elastic components that must operate under chlorinating or severe acid conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ta-3. Producer or source: Fansteel Metallurgical Corporation.

TANTALUM is a high-density, ductile metal with excellent resistance to corrosion by most acids and good high-temperature properties. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ta-2. Producer or source: Kawecki Berylco Industries Inc.. See also Alloy Digest Ta-10, June 1988.

WC Ta-10W is a tantalum-base alloy having a combination of low-temperature ductility and fabricability in both the recrystalilzed and wrought conditions, as well as excellent weld ductility. Developed originally for structural applications at elevated temperatures, it is now available in a complete line of aerospace hardware. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ta-1. Producer or source: Teledyne Wah Chang Albany.