Sandvik Sanicro 67 is a composite tube for various boiler applications. The outer tube layer is of Sanicro 67, an austenitic nickel-base alloy with excellent corrosion and stress-corrosion cracking resistance. This datasheet provides information on composition and physical properties. It also includes information on forming and joining. Filing Code: Ni-673. Producer or source: Sandvik Steel Company and Sandvik AB.

Sandvik 2RK66 is recommended for springs that will operate in extremely corrosive conditions. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength. It also includes information on low and high temperature performance as well as forming and heat treating. Filing Code: SS-992. Producer or source: Sandvik Steel Company.

Docol 450 Wear is an ultra-high strength steel that is used for many wear application in transportation and construction products. This datasheet provides information on composition, physical properties, microstructure, hardness, tensile properties, and bend strength. It also includes information on wear resistance as well as joining. Filing Code: SA-546. Producer or source: SSAB Swedish Steel Inc.

Docol 220M is an ultrahigh-strength steel that is used for many transportation and construction products. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on forming and joining. Filing Code: SA-545. Producer or source: SSAB Swedish Steel Inc.

Docol 85DP is an ultrahigh-strength cold-forming steel that is used for many transportation products. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on joining. Filing Code: SA-542. Producer or source: SSAB.

Carpenter Low-Expansion 45 alloy is a 45% nickel-iron alloy with a constant rate of thermal expansion useful in thermostats. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as heat treating and joining. Filing Code: FE-134. Producer or source: Carpenter.

Docol 205DP is an ultrahigh strength steel that is used for many transportation and construction products. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on forming and joining. Filing Code: SA-540. Producer or source: SSAB Swedish Steel Inc.

Docol 145DP is an ultrahigh-strength steel that is used for many transportation and construction products. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on machining and joining. Filing Code: SA-536. Producer or source: SSAB Swedish Steel Inc.

Docol 100W is a very-high-strength steel that is used for transportation products. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on joining. Filing Code: SA-516. Producer or source: SSAB Swedish Steel Inc.

Sandvik Sanicro 28 composite tube is used in services as superheater material for waste-derived fuel plants. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming and joining. Filing Code: SS-831. Producer or source: Sandvik Steel Company. See also Alloy Digest SS-442, March 1984.

TIMETAL 50A is a commercially pure titanium alloy with a minimum tensile strength of 345 MPa (50 ksi). It is readily formed at room temperature, although complex shapes must be warm formed for satisfactory results. This material is weldable by both electrical resistance and fusion procedures, although the latter methods can be used only if the material is protected from atmospheric contamination. This grade is used in airframe and chemical process applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: TI-120. Producer or source: Timet.

Sandvik Sanicro 63 was developed specifically for use as outer cladding of composite tubes in service as superheater materials for waste-derived fuel plants. It is a modification of UNS N06625. Typical inner components of the composite tubes are Sandvik 4L7 and Sandvik HT8. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on forming and joining. Filing Code: Ni-572. Producer or source: Sandvik.

Kaiser Aluminum alloy 6061 has excellent joining characteristics and good acceptance of coatings (anodizing response). It is used in applications where weldability and corrosion resistance are needed. The alloy is typically used in fittings, brake pistons, computer parts, couplings, and valves. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-360. Producer or source: Tennalum, A Division of Kaiser Aluminum. Originally published March 1999, corrected October 1999.

WRM alloy 5058 is a phosphor-bronze alloy with a good combination of electrical conductivity, tensile strength, and stress-relaxation resistance. Typical applications include lead frames, contact springs, and fuse clips. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on forming. Filing Code: CU-638. Producer or source: Waterbury Rolling Mills Inc.

6092/SiC/17.5P is a discontinuous metal-matrix composite fully characterized for discontinuously reinforced alloy (DRA) structural applications. The base alloy is Aluminum Association 6092, and the reinforcement material is SiC. This datasheet provides information on composition, physical properties, tensile properties, and compressive, shear, and bearing strength as well as fatigue. It also includes information on as well as machining and surface treatment. Filing Code: AL-359. Producer or source: DWA Aluminum Composites.

Alcoa C238 is a cold-finished aluminum wrought product developed for applications requiring postbrazing and welding strength. The alloy has good machinability and roll-threading characteristics. It has slightly lower corrosion resistance as compared to 6xxx series alloys. Alloy C238 has excellent welding and very good brazing properties. Initial applications include fittings and connectors that are brazed and/or welded. This product is also available in cold-heading rod that has been used to cold-form connectors. This datasheet provides information on tensile properties. It also includes information on corrosion resistance as well as machining and joining. Filing Code: AL-353. Producer or source: ALCOA Wire, Rod & Bar Division.

TIMETAL 3-2.5 (Ti-3%Al-2.5%V) alloy is cold formable and weldable. This alloy is used primarily for honeycomb foil and hydraulic tubing applications. Industrial applications, such as pressure vessels and piping, also utilize this alloy. The alloy is available with palladium stabilization to enhance corrosion resistance. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear and bend strength It also includes information on heat treating. Filing Code: TI-114. Producer or source: Titanium Metals Corporation (Timet).

Kaiser Aluminum alloy 2011 is one of the most popular screw machine stock alloys available. Tennalum, a division of Kaiser Aluminum, produces alloy 2011 in the T3 temper as Microchip II, which offers excellent machinability and surface finish. The chips from Tennalum’s Microchip II (T3 temper only) are known for being small in size. Alloy 2011 is typically used in connectors and fittings, brake pistons, computer parts, knobs, and meter shafts. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-352. Producer or source: Kaiser Aluminum Corporation.

The Al-2wt.%Cu matrix composite contains 60 vol.% alumina. The aluminum ceramic fiber is Nextel 610, which affects the longitudinal direction, resulting in a high longitudinal specific modulus and a specific strength with good off-axis properties. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on corrosion resistance. Filing Code: AL-345. Producer or source: 3M.

3M TITANIUM MATRIX COMPOSITES are produced by electron-beam evaporation to apply Ti-6Al-4V coating to high-strength, high-modulus silicon carbon fibers. The resulting composite has increased strength and stiffness over monolithic titanium/titanium alloy parts. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as creep and fatigue. It also includes information on surface treatment. Filing Code: TI-111. Producer or source: 3M Metal Matrix Composites Program.