SSAB Ramor 400 is a low-carbon, chromium-molybdenum-nickel-boron alloy protection steel that is used in the heat treated condition (Hardness = 360–460 HBW) for blast protection. This datasheet provides information on composition, hardness, tensile properties, and bend strength. It also includes information on forming, machining, and joining. Filing Code: SA-876. Producer or source: SSAB AB.

Lucefin Group 20MnCr5 and 20MnCrS5 are low-carbon, 1.2Mn-1.1Cr, alloy case-hardening steels that are used in the carburized or carbonitrided, and subsequently quench hardened and tempered, condition. These steels are, in general, used for large casehardened parts requiring high wear resistance and fatigue strength. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating and joining. Filing Code: SA-865. Producer or source: Lucefin S.p.A.

ArcelorMittal MTD P20 is a Mn-Cr-Mo-V plate steel used in cavity molds. Special processing is used to achieve lower sulfur levels and inclusion shape control. This datasheet provides information on composition. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-804. Producer or source: ArcelorMittal USA, Plate.

MTD 3 is a Mn-Cr-Mo-V plate steel used in cavity molds. ArcelorMittal USA MTD steels comprise a family of prehardened alloy plate steels developed for a variety of mold, tool, and die applications. This datasheet provides information on composition. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-798. Producer or source: ArcelorMittal USA, Plate.

MTD 2 is mold base quality, Mn-Cr-Mo plate steel. It is commonly used in holder blocks, clamping plates, and support plates. ArcelorMittal USA MTD steels comprise a family of pre-hardened alloy plate steels developed for a variety of mold, tool, and die applications. This datasheet provides information on composition. It also includes information on forming, machining, and joining. Filing Code: SA-794. Producer or source: ArcelorMIttal USA, Plate.

Ancorbond FLM alloys are press-ready, binder-treated Mn-Mo hybrid alloy systems that are Ni and Cu free. These cost-effective alloys can be sintered at 1120 deg C (2048 deg F) using N2-H2 atmospheres and conventional sintering practices. Excellent hardness and strength can be achieved with accelerated cooling in the sintering furnace, delivering properties comparable with more highly-alloyed, diffusion-alloyed, and hybrid steels. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. Filing Code: SA-736. Producer or source: Hoeganaes Corporation.

Kanthal 200 R 110 is a thermostatic bimetal and is recommended for use in the temperature range −20 to 250 deg C. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming. Filing Code: MN-5. Producer or source: Kanthal AB.

SAE 1345 is a through-hardening, manganese alloy steel with intermediate hardenability. It is most commonly used where good strength is needed but low-to-medium toughness is sufficient. Its wide range of uses in tools and machinery includes hand tools, gears, shafts, bolts and housings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-425. Producer or source: Alloy steel mills and foundries.

VERTI-COR Welding Electrode is a continuous tubular steel welding electrode with a powdered-metal-and-flux core; gas shielding and slag are used to protect the molten electrode and weld metal. The VERTI-COR Welding Electrode is used for all-position welding and is a member of the FLUXCOR family of electrodes. It is used to deposit typically 1.6 to 1.9% manganese steel weld metal that is tough and has tensile strengths in the range 80,000 to 97,000 psi, depending on composition of the shielding gas. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-384. Producer or source: Airco Welding Products.

AISI 1335 is a low-alloy through-hardening steel of moderate hardenability. It is used where medium strength and low-to-medium toughness meet the requirements of the application. It may be used in the unhardened condition or after quenching and tempering. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-330. Producer or source: Alloy steel mills and foundries.

ASTM A 533 Grade B is a manganese-molybdenum-nickel alloy steel for use in the quenched-and-tempered condition for plate for the construction of pressure vessels and other pressure equipment. It is used in 6 to 12-inch sections and is the most widely used steel for nuclear reactor pressure vessels. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-328. Producer or source: Alloy steel mills and foundries.

AISI 1345 is a through-hardening, low-manganese alloy steel with intermediate hardenability. It is used where good strength is needed but low-to-medium toughness is sufficient. Applications include many parts for machines and tools. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-318. Producer or source: Alloy steel mills and foundries.

AISI 1330 is a through-hardening low-alloy steel for applications where medium hardenability and strength with low to medium toughness are sufficient. It may be used in the unhardened condition or after quenching in oil or water followed by tempering. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-303. Producer or source: Alloy steel mills and foundries.

FOX 130 is an oil hardening manganese-molybdenum alloy steel recommended for automobile and general engineering machinery parts such as crankshafts, axles, connecting rods, gears, fasteners and other high tensile and shock resisting component parts. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-237. Producer or source: Samuel Fox & Company Ltd, Stocksbridge Works.

Rol-Man is the wrought form of Hadfield's austenitic manganese steel. It has high strength, high ductility and excellent wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-169. Producer or source: Manganese Steel Forge Company.

Tormanc Major is an oil-hardening manganese-molybdenum alloy steel recommended for automobile and general engineering machinery parts such as crankshafts, axles, connecting rods, gears, bolts, and other high tensile component parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-151. Producer or source: Samuel Fox & Company Ltd, Stocksbridge Works.

ISO-CAST 5 is a cast manganese-molybdenum steel of medium strength for general purposes. It is recommended for automobile and tractor parts, structural and machinery castings, gears, housings, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on casting, heat treating, machining, and joining. Filing Code: SA-147. Producer or source: Empire Steel Castings Inc..

JALLOY 7 is a manganese-molybdenum oil-hardening steel applicable where high hardness with good ductility or wear resistance is desirable. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: SA-32. Producer or source: Jones & Laughlin Steel Corporation. Originally published August 1955, revised January 1963.

IMPERIAL is a high-carbon, high manganese steel of great toughness and high wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-113. Producer or source: Edgar Allen & Company Ltd, Imperial Steel Works.

Amsco Manganese Steel is a high-carbon high-manganese austenitic steel recommended for wear and abrasion resisting applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, forming, heat treating, machining, and joining. Filing Code: SA-105. Producer or source: American Manganese Steel Division.