ACO Eurobar EN-GJS-400-18C-LT is a ferritic spheroidal graphite cast iron that is produced by the continuous casting process. It has a minimum tensile strength of 400 MPa (58 ksi) and a minimum elongation of 18%. It has a tensile strength exceeding that of the highest-tensile-strength grade of gray cast iron, together with much higher elongation and impact resistance. It is specifically designed to provide good impact properties at low temperature. This datasheet provides information on physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low temperature performance as well as casting, heat treating, and machining. Filing Code: CI-109. Producer or source: ACO Eurobar GmbH.

Meehanite SFP500 is a ductile iron that has a minimum tensile strength of 500 MPa (73 ksi) and a minimum elongation of 8%, when measured on test pieces machined from separately cast samples. This Meehanite grade possesses a mixed matrix of ferrite and pearlite, with the ferrite predominating. It offers a compromise between the relatively soft, low tensile, high ductility ferritic types and the harder, higher tensile, lower ductility pearlitic grades. Meehanite SFP500 is a good all-round material providing a degree of toughness coupled with a higher tensile strength in the as-cast condition. This datasheet provides information on physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-108. Producer or source: Meehanite Metal Corporation.

Meehanite SF450.15 is a ductile iron that has a minimum tensile strength of 450 MPa (65 ksi) and a minimum elongation of 15%, when measured on test pieces machined from separately cast samples. This Meehanite grade possesses a predominantly ferritic matrix giving the material a good level of ductility. It is used where a degree of shock resistance at ambient temperatures is important. Meehanite SF450.15 is of particular interest to design engineers wishing to replace fabrications or non-alloy steel castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-107. Producer or source: Meehanite Metal Corporation.

Meehanite SF420.12 is a ductile iron that has a minimum tensile strength of 420 MPa (61 ksi) and a minimum elongation of 12%, when measured on test pieces machined from separately cast samples. This Meehanite grade possesses a predominantly ferritic matrix giving the material a good level of ductility. It is used where a degree of shock resistance at ambient temperatures is important. Meehanite SF420.12 is of particular interest to design engineers wishing to replace fabrications or malleable iron castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-106. Producer or source: Meehanite Metal Corporation.

ISO1083/JS/400-15 is a ferritic spheroidal graphite cast iron that has a minimum tensile strength of 400 MPa (58 ksi) and a minimum elongation of 15%, when measured on test pieces machined from separately cast samples. It has a tensile strength exceeding that of the highest-tensile-strength grade of gray cast iron, together with much higher elongation and impact resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-105. Producer or source: International Organization for Standardization.

ISO1083/JS/400-18-LT is a ferritic spheroidal graphite cast iron that has a minimum tensile strength of 400 MPa (58 ksi) and a minimum elongation of 18%, when measured on test pieces machined from separately cast samples. It has a tensile strength exceeding that of the highest-tensile-strength grade of gray cast iron, together with much higher elongation and impact resistance. It is specifically designed to provide good impact properties at low temperature. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-104. Producer or source: International Organization for Standardization.

ISO1083/JS/350-22-RT is a ferritic spheroidal graphite cast iron that has a minimum tensile strength of 350 MPa (51 ksi) and a minimum elongation of 22%, when measured on test pieces machined from separately cast samples. It is specifically designed for applications where tensile strength is less important than impact and elongation properties. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on casting and heat treating. Filing Code: CI-103. Producer or source: International Organization for Standardization.

ACO Eurobar EN-GJS-350-22C is a ferritic spheroidal graphite cast iron that is produced by the continuous casting process. It has a minimum tensile strength of 350 MPa (51 ksi) and a minimum elongation of 22%. It is specifically designed for applications where tensile strength is less important than the impact and elongation properties. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on casting and heat treating. Filing Code: CI-102. Producer or source: ACO Eurobar GmbH.

ACO Eurobar EN-GJS-350-22C-LT is a ferritic spheroidal graphite cast iron that is produced by the continuous casting process. It has a minimum tensile strength of 350 MPa (51 ksi) and a minimum elongation of 22%, and it is specifically designed to provide good impact properties at low temperature. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on heat treating. Filing Code: CI-101. Producer or source: ACO Eurobar GmbH.

Dura-Bar 202 (Type 2) Ni-Resist Iron is a flake graphite austentic cast iron that is produced by the continuous casting process. It is suitable for most applications requiring Dura-Bar 201 (Type 1) Ni-Resist Iron, and the grades are often used interchangeably. The machinability of Dura-Bar 202 (Type 2) Ni-Resist Iron will be similar to the pearlitic grades of gray iron, namely G2 and G2A. It is especially suitable for service temperatures above 705°C (1300°F) and in the stem handleing applications. Copper levels are maximized at 0.50%, and this grade is suitable for food grade applications. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating. Filing Code: CI-100. Producer or source: Dura-Bar Metal Services.

ACO Eurobar EN-GJL-300C (5.1308) is a higher-tensile-strength gray cast iron that is produced by the continuous casting process. It provides a combination of high strength while still maintaining good thermal conductivity compared with other types of cast iron. This grade approaches the maximum tensile strength attainable in gray cast iron. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on wear resistance as well as heat treating and machining. Filing Code: CI-99. Producer or source: ACO Eurobar GmbH (a subsidiary of ACO Guss GmbH).

Meehanite SF400 is a ferritic ductile iron that has a minimum tensile strength of 400 MPa (58 ksi) and a minimum elongation of 17%, when measured on test pieces machined from separately cast samples. This fully ferritic Meehanite grade is produced by either strict control of the raw materials during melting or by an annealing heat treatment to eliminate any pearlite formed during solidification. Meehanite SF400 is specifically designed for general engineering applications where high ductility and exceptional resistance to impact is required. It also provides maximum toughness at ambient temperatures. Compared with cast steel of similar strength, it is possible to reduce machining times by up to 25%. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fatigue. It also includes information on casting, heat treating, and machining. Filing Code: CI-98. Producer or source: Meehanite Metal Corporation.

JSA FC300 is a higher-tensile-strength gray cast iron that has a pearlitic matrix, and a minimum tensile strength of 300 MPa (44 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. The tensile strength of JSA FC300 approaches the maximum tensile strength attainable in gray cast iron. It provides a combination of high strength while still maintaining good thermal conductivity. Applications, therefore, tend to be confined to those where thermal conductivity requirements in service preclude the use of one of the other higher-strength materials such as spheroidal graphite cast irons, which have inferior thermal properties. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting and heat treating. Filing Code: CI-97. Producer or source: Japanese Standards Association (JSA).

ACO Eurobar EN-GJL-250C (5.1203) is an intermediate-tensile-strength gray cast iron that is produced by the continuous casting process. Compared with the lower strength gray cast iron grade, EN-GJL-200C (5.1202), it possesses superior wear resistance, while still maintaining good thermal conductivity, damping capacity, and machinability. Brinell hardness values in Table 3 corrected September 2022. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-94. Producer or source: ACO Eurobar GmbH (a subsidiary of ACO Guss GmbH).

CEN EN-GJL-200 is an intermediate-tensile-strength gray cast iron that has a predominantly pearlitic matrix, and a tensile strength of 200–300 MPa (29–44 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, CEN EN-GJL-200 contains lower carbon and silicon contents and exhibits superior wear properties, while still maintaining good thermal conductivity, good damping capacity, and good machinability. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on casting, heat treating, and machining. Filing Code: CI-96. Producer or source: European Committee for Standardization (CEN).

Dura-Bar 201 Type 1 is a flake graphite austenitic cast iron that is produced by the continuous casting process. It is commonly specified for corrosion-resistant applications involving exposure to salt solutions, sea water, mild acids, alkalis, and oil field liquids, both sweet and sour. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating. Filing Code: CI-95. Producer or source: Charter Dura-Bar, Inc.

ACO Eurobar EN-GJL-250C (5.1203) is an intermediate-tensile-strength gray cast iron that is produced by the continuous casting process. Compared with the lower strength gray cast iron grade, EN-GJL-200C (5.1202), it possesses superior wear resistance, while still maintaining good thermal conductivity, damping capacity, and machinability. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-94. Producer or source: ACO Eurobar GmbH (a subsidiary of ACO Guss GmbH).

Meehanite SFF400 is a ferritic ductile iron with a minimum tensile strength of 400 MPa (58 ksi) and a minimum elongation of 20%, when measured on test pieces machined from separately cast samples. It is specifically designed to provide good impact properties at low temperature. This fully ferritic Meehanite grade is produced from specially selected high purity raw materials in order to fully develop the mechanical properties in the as-cast condition. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and joining. Filing Code: CI-93. Producer or source: Meehanite Metal Corporation.

JSA FC350 is a higher-tensile-strength gray cast iron that has a pearlitic matrix, and a minimum tensile strength of 350 MPa (51 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. It provides high strength while still maintaining good thermal conductivity. This grade approaches the maximum tensile strength attainable in gray cast iron. Applications therefore tend to be confined to those where thermal conductivity requirements in service preclude the use of one of the other higher-strength materials such as spheroidal graphite cast irons, which have inferior thermal properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: CI-92. Producer or source: Japanese Standards Association (JSA).

CEN EN-GJL-150 (5.1200) is a low-tensile-strength gray cast iron that has a tensile strength of 150–250 MPa (22–36 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. It is useful in situations where high thermal conductivity, damping capacity, and machinability are important, but where tensile strength and hardness are not the crucial properties in service. The high carbon content of this material also imparts good lubricated bearing properties, provided that the environment does not include abrasive debris that can score and wear the soft matrix. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on casting and heat treating. Filing Code: CI-91. Producer or source: European Committee for Standardization.